Ingellen, a professionalfiber optic equipmentmanufacturer, supplies a wide range of cross connect cabinets. As you know, fiber optical cross connect cabinets are specially designed for telecom &data applications, it will benefit your daily life a lot.

Cross connect Cabinet, works as an interface equipment at the splice of the trunk cable and wiring cable in the access network, is mainly used to connect the fiber trunk cable and the distribution cable between the interface devices, providing the functions of cable, fastness, grounding protection, welding, jumping(distribution), storage, switching and others. With a high versatility in the optical route, especially for fiber optical communication system into a central office trunk cable and distribution side, cross connect cabinet can achieve the fiber optic lines linked, distributed and transited easily.

Cross connect cabinetFeatures:
High intensity and anti-erosion performance;
Able to counter abrupt climate change and extreme environment;
Capacity can be flexibly customized as required;
Installation is quick and convenient;
Built-in direct splice unit is capable for providing direct connection function;
Perfect design of fiber wiring routing could facilitate management and maintenance of fibers;
With secure and reliable fastening and grounding protection devices for the optic fiber;
Applicable to strap-shaped and non-strap shaped fibers.

Cabinet is made of high strength stainless steel, protection class IP65, high intension,corrosion‐resistant, all weatherproof and can protect it from accidental damage or malignant destruction. With double‐layer structure, filled with non‐combustible and a better insulation effect of the molding quartz glass wool in the middle, greatly enhanced the cabinet effect of heat insulation, and flame‐retardant properties.Outdoor cross-connect cabinet is the best choice for cross-connecting outdoor optical cables. The cabinets offer perfect environment for fibers to be spliced and well organized under any outdoor environments.

The Ingellen High-Density cabinet has been designed to host dense passive cross-connects in data centres. Specific attention has been given to technical constraints of data centres such as cooling and space scarcity. Numerous features contribute to an optimal space utilisation and enable installation on busy data centre floors. The High-Density cabinet enables excellent front, rear and lateral access. This is great important during installation but also during maintenance and upgrade operations. Proper management of large numbers of cords and securing clarity is critical for data centre management and reliability over the life time.

Ingellen Cross Connection Cabinets are available in various sizes to meet your networking requirements. The cross connection cabinets consist of wall mount, pole mount and pedestal mount depending on the infrastructural requirements. Compatible with Corning Cable Systems rack-mountable hardware, these cabinets can accommodate many combinations of connector, splice and coupler housings. The modular system makes it possible to create fiber optic configurations for outdoor applications.

Also ingellen supplies a wide various other fiber optic equipments including varies type of fiber optic transeivers, GBIC, SFP+, Copper, Xenpark andSFP transceivers, find what you want there. Ingellen guarantees all its products with perfect quality which would surely meet your expectations.

Posted by: mikofy at 06:56 AM | No Comments | Add Comment
Post contains 489 words, total size 4 kb.

Ingellen, a leading optical communication components innovator, had announced the availability of industrial-temperature reconfigurable Fast Ethernet/Gigabit Ethernet SFP, transceivers with Serial Gigabit Media Independent Interface(SGMII).

TheSGMII SFPtransceiver can be described as Comparable prefer Multimedia Self-governing User Interface (MII). It is a 100BASE-FX Small Form-Factor Pluggable (SFP) Fast Ethernet Interface Converter on Gigabit SFP Ports, happens to be raised for Gigabit Ethernet. The SGMII SFP includes two sections: The standard SFP part and the PHY part built with SGMII interface. The SGMII SFP transceiver meets SFP MSA and SFF-8472 with duplex LC receptacle, and it applied metal enclosure for lower EMI to improve the performance.

The function of SGMII SFP:
SGMII SFP is used to connect Gigabit Ethernet to Fast Ethernet, such as between switch and switch interface, switched backplane applications and router/service interface. The system can get the LOS(or Link)/Disable/Fault information via I2C register access. The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner.

The system can get the LOS(or Link)/Disable/Fault information via I2C register access. The host equipment can also access this information via the 2-wire serial CMOS EEPROM protocol. To carry frame data and link rate information between a 10/100/1000 PHY and an Ethernet MAC, SGMII uses a different pair for data signals and for clocking signals, with both being present in each direction, alsotakes a different approach because of GMII from her low-power not to mention affordable green count up serial interface. With these help it at the same time increasingly being evident in everydifferent place, rendering 8 alert facial lines in whole.

SGMII SFP Features:
The SGMII SFP Transceiver is a high-performance, cost-effective module. It is designed for 100BASE-FX applications of 2 km uo to 10 km;
Connect Gigabit Ethernet and Fast Ethernet;
Built-in PHY supporting SGMII Interface;
Switch to switch interface;
Built-in MCU for easy configuration;
Support more link status monitor, such as CRC error counter,package counter and Far End Fault Indication (FEFI);
100BASE-FX/100BASE-LX/100BASE-LH operation;
1000BASE-LX/1000BASE-LH operation;
1310nm FP/DFB laser and PIN photo-detector;
550m/2km/10km/40km/80km transmission with MMF/SMF;
Standard serial ID information Compatible with SFP MSA;
SFP MSA package with duplex LC connector;
Operating case temperature:-5 to +70°C, -40 to +85°C.

Ingellen is a professional manufacturer of fiber optic transceivers. It supplys a vast array of high performance SGMII SFP fiber optic transceivers. The standard serial ID information Compatiblewith SFP MSA describes the transceiver’s capabilities, standard interfaces, manufacturer and other information. All of theSGMII SFP transceiversmodules are 100% compatible with original CiscoSFP modules.

Posted by: mikofy at 07:14 AM | No Comments | Add Comment
Post contains 462 words, total size 4 kb.

The latest released HP J4859C and J4858C compatible SFP are fully compatible with original HP SFP and can be used in any SFP module on HP ProCurve switches that support original HP SFPs. In addition, the transceiver can be used in any industry standard networking equipment which complies with Multi-Sourcing Agreement. As a third party OEM/ODM mamufactuer, Ingellen provides these two types of HP compatible SFP transceivers to meet your data center needs. Then let’s take an overview about the features of J4859C and J4858C.

J4858C
J4858C, a small form-factor pluggable (SFP) Gigabit SX transceiver that provides a full-duplex Gigabit solution up to 550 m on multimode fiber.
Device Type: HP ProCurve Gigabit SX-LC Mini-GBIC Transceiver Module;
Enclosure Type: Plug-in module;
Dimensions (WxDxH): 1.4 cm x 5.7 cm x 1.2 cm;
Weight: 20 g;
Cabling Type: Ethernet 1000Base-SX;
Data Transfer Rate: 1 Gbps;
Data Link Protocol: Gigabit Ethernet;
Compliant Standards: IEEE 802.3z;
Interface (Bus) Type: SFP (mini-GBIC).

J4859C
J4859C, a small form-factor pluggable (SFP) Gigabit LX transceiver that provides a full-duplex Gigabit solution up to 10 km (single-mode) or 550 m (multimode). This product is designed for long distance single-mode fiber connectivity. It supports multimode fiber connectivity to limited distances.
J4859C Specifications:
Device Type: SFP (mini-GBIC) transceiver module – LC;
Enclosure Type: Plug-in module;
Dimensions (WxDxH): 1.4 cm x 5.7 cm x 1.2 cm;
Weight: 20 g;
Cabling Type: 1000Base-LX;
Data Transfer Rate: 1 Gbps;
Data Link Protocol: Gigabit Ethernet;
Max Transfer Distance: 10 km;
Compliant Standards: IEEE 802.3z;
Designed For: HP E2610, E2810, E3500, E4202, E4204, E4208, E6200, V1400, V1700; HP ProCurve 20p 10/100/1000, EDGE Fabric Switch 81XX, Switch 1800-24, Switch 2510-24, Switch 26XX, Switch 2900-24,
Switch 2900-48, Switch 5400zl 24, Switch 5406zl-48, Switch 5412zl-96, Switch 54XX, Switch 8212, Switch vl 4-port, vl 20.

Ingellen, the expert of switching and conversion technology, announced the introduction of its new HP compatible, C version, Small Form Pluggable (SFP) transceivers and so on. Ingellen offers customers with a complete line of affordable Gigabit HP compatible SFP optical transceivers. All of the different modules supplied are developed based on a common standard. This means that they can all be compatible with the same network and with each other to meet data communications requirements. They are all high efficient.

Posted by: mikofy at 08:51 AM | No Comments | Add Comment
Post contains 384 words, total size 3 kb.

Ingellen supplies a full range of fiber optic transceivers, which include SFP, GBIC, SFP+, XFP, X2, Xenpak Transceiver. These modules are in different models, BIDI, CWDM, DWDM, data rate available from 100Mbps up to 40Gbps: 100 Mbps for Fast Ethernet, 155 Mbps for SDH STM-1/SONET OC-3/ATM, 1.0625 Gbps, 2.125Gbps, 4.25Gbps, and 10Gbps for Fiber Channel, 1.25 Gbps, 2.5Gbps, 4.25Gbps, and 10Gbps for Gigabit Ethernet.

Now, I will introduce one kind of hot seller, X2 Transceivers - 10G X2 transceiverX2 transceiver is the 10G fiber optic transceiver, its development was based on former Xenpak standards, X2 10Gb transceiver inner function is almost similar with Xenpak, and X2 also can use one transceiver to fulfill all 10G Ethernet optical port function. X2 transceiver is about half size of Xenpak, this enable it suit for density installations.

IngellenX2 Transceiversare fully compliant to IEEE 802.3ae standard for Ethernet and the 10GFC Rev. 4 Fibre Channel standard, making it ideally suited for 10 GbE datacom and storage area network (SAN / NAS).

Ingellen 10G X2 transceiver is a highly integrated, serial optical transceiver module for high-speed, 10Gbit/s data transmission applications.10G X2is a standardized form factor for 10 Gb/s fiber optic transponders that is used for data transfer rates from 10.3 Gb/s to 10.5 Gb/s. It is protocol-specific: Either 10G Ethernet or 10G Fibre Channel versions are available. X2 transponders are used in datacom optical links only (not telecom), and they are smaller than old generation XENPAK transponders. Its electrical interface to the host board is also standardized and is called XAUI (4 x 3.125 Gb/s).

10Gbps Ethernet standards were defined by IEEE in 2002, it not only enlarges the data transmission rate, but it has greater working distance. IEEE 802.3ae 10G Ethernet standard defined the working distance from 300 meters to 40km. We supply the X2 10G fiber optic transceivers that are fully compatible with equipment from other suppliers.

Ingellen transceivers are compliant with the Small Form Factor Pluggable the Multi-Sourcing Agreement (MSA) ensuring interoperability with all other MSA compliant networking devices, As to the fiber optic transceiver, you can have accessed to SFP Transceiver, GBIC Transceiver, CWDM SFP Transceiver, DWDM SFP Transceivers, SGMII SFP Transceiver, SFP+ Transceiver, XFP Transceiver, X2 Transceivers, Xenpak Transceiver and More from Ingellen. Want to know more information about transceivers, click at http://www.ingellen.com.

Posted by: mikofy at 03:04 AM | No Comments | Add Comment
Post contains 390 words, total size 3 kb.

As the improvement of fiber optic technologies, 10G Ethernet products are coming to fit the increasing demand for bandwidth. SFP plus is the 10G fiber optic transceiver which used for 10G Ethernet and other high speed transmissions. SFP+ is with much higher data rate and latest industrial standards. SFP+ is more compact size compared with the former 10G transceivers X2 and Xenpak, it has greater ability for density installations.

Several standards for SFP+ has been released for 10Gpbs networks, including 10GBase-SR, 10GBase-LR and 10GBase-LRM. 10GBase-SR is for OM3 multimode optical fiber, relevant SFP plus working distance 300 meters max. 10GBase-LR is for single mode optical fiber, relevant SFP plus working distance 10km. 10GBase-LRM is for FDDI multimode fiber, the SFP plus working distance 220 meters.

Main features of Cisco 10GBASE SFP:
Smallest 10G form factor;
Supports 10GBASE Ethernet and OTU2/OTU2e;
Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch;
Provides flexibility of interface choice;
Supports "pay-as-you-populate" model;
Supports digital optical monitoring capability;
Supports the Cisco quality identification feature that enables a Cisco switch to identify whether the module is certified and tested by Cisco;
Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link.

Cisco SFP 10G SRis a hot fiber SFP+ transceiver module for multimode fiber links, it is 10GBase SR compliant and work at 850nm used for 10Gigabit applications, this transceiver is in standards SFP+ package to plug into the ports or slots on Cisco equipment, optical interface is duplex LC connector. It is complete compatible with IEEE 802.3ae 10Gbase-SR. Electrical interface of the SFP+ SR is compliant to SFF-8431. SFP 10G SR features low power consumption and it supports multi-rate from 2G fiber channel to 10G Ethernet, its max working distance is 300 meters over multimode optical fiber. When use 2000MHz*km MMF (OM3), 10Gbase-SR up to 300m link lengths are possible. When use 4700MHz*km MMF (OM4), up to 400m link lengths are possible.

Cisco Transceiver Modules support Ethernet, Sonet/SDH and Fibre Channel applications across all Cisco switching and routing platforms.Cisco GBIC transceivercan be interchanged on a wide variety of Cisco products and can be intermixed in combinations of 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-ZX, or 1000BASE-CWDM interfaces on a port-by-port basis.

SFP+ is the upgrade virsion of SFP transceiver that used for 10G Ethernet network. Practically Cisco device can only work with Cisco compatible transceivers like Cisco SFP+ orCisco SFP transceiver, which supports the Cisco Quality Identification (ID) features and allows a Cisco switch or router to identify and validate the transceiver module that is certified and tested by Cisco.

Posted by: mikofy at 06:55 AM | No Comments | Add Comment
Post contains 434 words, total size 4 kb.

The small form-factor pluggable (SFP) is a compact, hot-pluggable transceiver used for both telecommunication and data communication applications. These modules are designed to support SONET, Gigabit Ethernet, Fibre Channel, and other communications standards.SFP modulemakes the fiber optic network or fiber-Ethernet network easier to upgrade or maintain. Because SFP modules can be easily interchanged, electro-optical or fiber optic networks can be upgraded and maintained more conveniently than has been the case with traditional soldered-in modules. Rather than replacing an entire circuit board containing several soldered-in modules, a single module can be removed and replaced for repair or upgrading. This can result in a substantial cost savings, both in maintenance and in upgrading efforts.

SFP structurer:
SFP transceiver has two ends, one is an optical cable plugs into and another for connecting an electrical device. The form factor and electrical interface are specified by a multi-source agreement(MSA). It interfaces a network device motherboard (for a switch, router, media converter or similar device) to a fiber optic or copper networking cable.

SFP Features:
Compliant with SFP MSA;
Compliant with IUT-T G.957 and G.958;
Compliant with Industry Standard RFT Electrical Connector and Cage;
100Ω Differential AC coupled PECL Outputs;
Single 3.3V Power supply and TTL Logic Interface;
Various kinds SFP with different working wavelength and distance;
Extended Operating Temperature Range(0℃~70℃);
Hot Pluggable;
EEPROM with Serial ID functionality;
LC Connector Interface;
Low EMI and Low power dissipation;
Class 1 Laser Product Compliant with the Requirements of IEC 60825-1 and IEC 60825-2.

SFP and GBIC Compare
Unlike gigabit interface converter (GBIC) with SC fiber optic interfaces, SFP is with LC interface and the main body size of SFP is only about half ofGBIC transceiver, which makes SFP space saving. Signal transmitting rate of these modules range from 100Mbps up to 4Gbps or more, working distance of these SFP transceiver modules can be from 500 meters to 100 kilo meters, working wavelength of different SFP modules are typically 850nm, 1310nm and 1550nm.

Ingellen, a directfiber optic manufacturer, offers a range of SFP transceivers and GBIC transceivers for Gigabit Ethernet and Fibre Channel appications. These small, modular optical interface transceivers offer a convenient and cost effective solution for the adoption of Gigabit Ethernet and Fibre Channel in data center, campus, metropolitan area access and ring networks, and storage area networks. Ingellen supplys SFP transceiver modules, CISCO SFP fiber optic transceiver,GLC-SX-MM,GLC-LH-SM,GLC-ZX-SM,GLC-T, CWDM SFP,2G,4G,10G, etc, many types with good price and excellent quality. All of these transceivers are certified 100% compliant for all Cisco switch and router product lines.

Posted by: mikofy at 04:17 AM | No Comments | Add Comment
Post contains 423 words, total size 4 kb.

The SFP (Small Form-Factor Pluggable) transceiver modules are hot-pluggable I/O devices that plug into module sockets. The transceiver connects the electrical circuitry of the module with the optical or copper network. GBIC transceiver, short name for the Gigabit Interface Converter, is a media conversion device between Gigabit Ethernet and fiber optic networks. Via the GBIC transceiver, Gigabit network equipment can directly connect to copper wires, single mode fiber ports or multimode fiber ports. Cisco SFP can be regarded as the upgrade version GBIC. Unlike GBIC with SC fiber optic interfaces, cisco SFP is with LC interface. Moreover, its main body size of SFP is only about half of GBIC, which makes SFP space saving.

Cisco pluggable transceivers offer a convenient and cost effective solution for the adoption in data centers, campuses, metropolitan area access and ring networks, and storage area networks. Users can replace a single SFP module during the process instead of replace the whole board with many modules on it. Cisco Transceiver Modules support Ethernet, Sonet/SDH and Fibre Channel applications across all Cisco switching and routing platforms. The Cisco SFP transceiver is defined by a multi source agreement between some manufacturers in the industry.

Cisco SFP fiber optic transceivers, which include Cisco GLC-T SFP, Cisco CWDM SFP, Cisco DWDM SFP, Cisco Copper SFP and Cisco Bidi SFP.Cisco GLC TSFP transceiver is a hot pluggable module use RJ45 interface, it is compliant to IEEE 802.3 and its dimension is 0.6 in x 2.8 in x 0.6 in, GLC T is with plug in module type Mini-GBIC.

GLC T is 1000Base SFP fiber optic transceiver module via Category 5 copper line, Cisco GLC T fiber transceiver provide 1Gbps data transfer and it provides full-duplex Gigabit Ethernet connectivity to high-end workstations and between wiring closets over existing copper network infrastructure. The GLC T SFP transceiver provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address A0h.

GLC TSFP Features:
Up to 1.25Gb/s bi-directional data links;
Hot-pluggable SFP footprint;
Extended case temperature range (0°C to +70°C );
Fully metallic enclosure for low EMI;
Low power dissipation (1.05 W typical);
Compact RJ-45 connector assembly;
Access to physical layer IC via 2-wire serial bus;
1000 BASE-T operation in host systems with SERDES interface;
10/100/1000Mbps compliant in host systems with SGMII interface.

Ingellen, a manufacturer supplies a various kinds offiber optic products, has different SFP transceivers with Cisco compatible for fast Ethernet and Gigabit Ethernet, SFP,Cisco,GLC SX MM,GLC T,GLC ZX SM,GLC BX U,GLC BX D,CWDM DWDM and so on. Our Cisco SFP equivalent products are manufactured and tested strictly according to industrial standards, they are compatible to use with equipment from other companies including Cisco. We supply the SFP fiber optic transceiver modules with good price, excellent compatibility and fast delivery.

Posted by: mikofy at 04:09 AM | No Comments | Add Comment
Post contains 489 words, total size 4 kb.

We all understand thefiber optic pigtailhas a interface, its connecting the optical fiber and the optical fiber coupler of a similar half of the patch connector, it comprises a patch connector and a fiber. They are different of pigtail and patch cable, the patch cable has a variety of different interfaces and require different coupler, the patch cable can divied into two to be used as a pigtail.

There are many kinds of fiber optic pigtail

1.According to the transfer mode, it can be divied into Single-mode (sheath color is generally yellow) and Multi-mode (jacket color is generally orange), of course, there will be other colors, but most of this color.

2.According to the connector, there are SC, LC, FC connector is more commonly used, such as ST, MTRI, MU with a small range. The SC fiber optic pigtail connectors are compliant to IEC, TIA/EIA, NTT and JIS specifications. It is with one piece construction and pulls proof design. SC is low cost but high performance, which makes it one of the most popular cables.

The LC fiber optic pigtail connectors feature the RJ-45 style interface with low insertion loss and low back reflection; it is with high precision alignment and is widely used all over the world. It is with zirconia ceramic ferrule. The same time, the LC pigtail switch can be connected directly, without a coupler, When pigtail Connect one end of the cable, if you need to protect should be used in terminal box, and the terminal box the best selection out pigtails box directly.

The FC fiber optic pigtail connector is compliant to IEC, TIA/EIA, NTT and JIS specifications. The FC connector is with PC, UPC, APC versions. Both single mode and multimode versions come with a zirconia ceramic ferrule.

The ST fiber optic pigtail connector is with metal outer body and with a long spring loaded ferrule hold the optical fiber. ST Cable can be 9/125 single mode or 50/125 multimode or 62.5/125 multimode. ST fiber pigtails connector ferrule interface can be PC, UPC or APC.

The MU fiber optic pigtail connector is NTT and JIS compliant. It is with tunable zirconia connector ferrule and features the small size, optical and mechanism performance is similar as the SC. This pigtail has zirconia ceramic ferrule.

The MTRJ fiber optic pigtail cable end is made of a duplex precision molded MT feruled connector. The MTRJ is with duplex plastic ferrule and compliant to TIA/EIA 568-A. MTRJ is a plastic ferrule connector pigtail.

3. According to the end face type, it can be divided into UPC and APC.

Typical applications offiber pigtailis to link the fiber optic cable with fiber optic equipment, the fiber optic pigtail with connector side is used to link the equipment, while the other side of the pigtail is melted together with the fiber cable, by melting together the fiber glasses, it can reach a minimum insertion loss. Common types of fiber optic pigtails are usually with 0.9mm fiber cable diameter, and usually installed inside ODF unit. most commonly used types are SC fiber optic pigtail, ST fiber optic pigtail,FC fiber optic pigail, LC fiber optic pigtail ,MT-RJ fiber optic pigtail,SC/APC fiber optic pigtail, FC/APC fiber optic pigtail and E2000 fiber optic pigtail.

As the leadingfiber optic productsmanufacturer, Ingellen also offer the waterproof fiber optic pigtail, they are produced strictly according to IEC standards, the products feature low insertion loss, high return loss, good interchangeability and repeat push-pull performance, which make them easy to use. The waterproof fiber optic pigtails are with strong jacket and waterproof sealed head connectors; they can be used in harsh environment, all of which are with best prices and guaranteed qualities.

Posted by: mikofy at 04:15 AM | No Comments | Add Comment
Post contains 619 words, total size 4 kb.

SFP(Small Form-Factor Pluggable Plus) fiber transceiver modules make the fiber optic network or fiber-Ethernet network easier to upgrade or maintain, users can replace a single SFP module during the process instead of replace the whole board with many modules on it. SFP transceivers are different types working with different wavelength for various kinds of distances. SX SFP use 850nm for max 550 meters, LX SFP use 1310nm for max 10km, ZX SFP could reach 80km. There is also copper SFP that use a RJ45 interface. DOM function for SFP is optional, it help users detect real time SFP working statusSFP puls transceiveris an innovative, next-generation transceiver module.

Cisco SFP is also hot plugable, it is an upgraded version fiber optic transceiver, it represents the trend to be smaller and more flexibility. Cisco SFP includes a wide range of the transceivers with different working wavelength and distance. In the following list I will introduce you some information about GLC SX MM Transceiver and GLC LH SM Transceiver.

GLC SX MM Transceiver
GLC SX MMis 1000Base-SX SFP fiber optic transceiver for multimode fiber and it works at 850nm wavelength. GLC SX MM SFP is hot swappable module that fit for Gigabit Ethernet port or slot and link the port with the network, whose interface is dual LC for optical. GLC SX MM is about 1.3 cm x 5.7 cm x 0.9 cm in dimension, and 75g in weight. The GLC SX MM transceivers are compatible with SFP Multi-Source Agreement (MSA), 1000Base SX standard for Gigabit Ethernet and SFF-8472.

The GLC SX MM transceiver consists of three sections: a VCSEL laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The GLC SX MM SFP transceivers are high performance, cost effective modules supporting data-rate of 1.25Gbps and 550m transmission distance with MMF.

GLC LH SM Transceiver
GLC LH SMis a SFP fiber optic transceiver working at 1300nm wavelength, GLC LH SM is suit for both multimode optical fiber and single mode optical fiber, it is small size transceiver with LC interface and it is hot swappable, easy to use, no need further configuration. GLC LH SM is used in Gigabit network and its max working distance is 10km over SMF or 550meters over MMF, data transfer rate at 1Gbps and it works based on IEEE 802.3z standards.

The GLC LH SM transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.

SFP fiber optic transceivers are upgraded version of its former GBIC transceivers, Cisco SFP transceiver adopt LC interface and its size is only about half of GBIC, thus Cisco SFP fiber transceivers fit for dense installations.

Posted by: mikofy at 04:14 AM | No Comments | Add Comment
Post contains 473 words, total size 4 kb.

OC-3 also known as STS-3 (electrical level) and STM-1 (SDH)， is a network line with transmission speeds of up to 155.52Mbit/s with optical fibers. OC-3 SFP modules are often used for Fast Ethernet, SDH/SONET and FTTx applications.

OC3 SFP(Small Form Factor Pluggable) module is specifically designed for the high performance integrated duplex data link over single mode optical fiber. These transceiver modules are compliant with the SFP Multisource Agreement (MSA). With the hot pluggability, these modules offer an easy way to be installed into SFP MSA compliant ports at any time without the interruption of the hostequipments operating online.

Ingellen is a leading supplier of wide ranges of STM-1 SFP modules, all of our oc3 stm1 SFP transceivers can be manufactured to be complete compatible with major brands Cisco, Juniper, Hp, Dell, Alcatel ect., Ingellen can customize your required compatible OC3 SFP transceivers like Cisco OC3 SFP transceivers to fit for you special applications. Next I will introduce some major custom Cisco OC3 SFP transceivers that are available from us:

SFP-OC3-MM：
Description: OC-3/STM-1 pluggable short-reach (2 km) transceiver module, 1310-nm wavelength, MMF, LC connector
SFP-OC3-SR：
Description: OC-3/STM-1 pluggable short-reach (2 km) transceiver module, 1310-nm wavelength, LC connector
SFP-OC3-IR1：
Description: OC-3/STM-1 pluggable intermediate-reach (15 km) transceiver module, 1310-nm wavelength, LC connector
SFP-OC3-LR1：
Description: OC-3/STM-1 pluggable long-reach (40 km) transceiver module, 1310-nm wavelength, LC connector
SFP-OC3-LR2：
Description: OC-3/STM-1 pluggable long-reach (80 km) transceiver module, 1550-nm wavelength, LC connector

SFP-OC3-MMandSFP-OC3-SRare for Gigabit Ethernet and SONET/OC3 applications whileSFP-OC3-IR1, SFP-OC3-LR1, SFP-OC3-LR2 are for SDH STM-1, I-1.1, SONET OC-3 SR1, Fast Ethernet, Other Optical Links applications.

OC-3 SFP Transceiver Platform Support and Minimum Software Release Requirements:
SPA-2XOC3-POS, SPA-4XOC3-POS, SPA-4XOC3-POS-V2, SPA-8XOC3-POS, SPA-1XOC3-ATM-V2, SPA-1XOC3-ATM-V2, SPA-3XOC3-ATM-V2, SPA-4XOC3-ATM
SPA software support is determined by the platform on which the SPA is installed. Refer to the SPA release notes for the correct software release.

Ingellen provide custom service for other Cisco compatible SFP transceivers with the required specifications provided like GLC-SX-MM, GLC-LH-SM, GLC-ZX-SM etc. All of transceivers are fully tested before shipping to you and they are guaranteed to be totally compatible with all Cisco series switches and modules that support SFP transceivers. Enjoy you journey at www.ingellen.com or contactsales@ingellen.com or 86-755-8326 9350 for more detailed product or service information.

Posted by: mikofy at 04:05 AM | No Comments | Add Comment
Post contains 379 words, total size 4 kb.

The simplest couplers are fiber optic splitters. Thefiber optic splitter, also called beam splitter, is used to split a fiber optic beam into several beams at a certain splitting ratio. A fiber-optic splitter is a device that takes a single fiber optics signal and divides it into multiple signals. Fiber optic splitter is one of the key components in FTTH. Fiber optic splitters can be terminated with different kinds of connectors, the main package could be box type or stainless tube type, one is usually used with 2mm or 3mm outer diameter cable, the other is usually used with 0.9mm outer diameter cables. Based on working wavelength difference there are single window and dual window fiber optic splitters. And there are single mode fiber splitter and multimode fiber splitters. Typical connectors installed on the fiber optic splitters are FC or SC type.

Fiber Optic Splitter Features:

Single Mode, multimode, and PM fiber types;
Multiple port configurations, custom length and cable diameters;
Various splitting ratios, 50:50 to 1:99;
Tube type or Box type, PLC fiber optic splitters or Fused fiber optic splitters;
PC, UPC, and APC fibre optic connectors;
Available with FC, SC, ST, LC, and MU connectors.

Single window fiber optic splitter is with one working wavelength, dual window fiber optic splitter is with two working wavelength. For multimode fiber, the term means that the fiber is optimized for 850 nm and 1310 nm operation. For single-mode fibers, the term means that the fiber is optimized for 1310 nm and 1550 nm operation. For single window fiber optic splitter, its working wavelength usually is one of the above said wavelength.

Depend on the technology used, there are FBT (Fused biconical taper) splitter and PLC (Planar Lightwave Circuit) fiber splitter.FBT splitteris a traditional type with over 20 years history, it is a mature products. It is low cost and easy to make, but fused fiber optic splitters optical loss are sensitive to wavelength and this is big disadvantages. The PLC Splitters are developed based on silica glass wave-guide process with reliable precision aligned fiber pigtail. PLC fiber optic splitters are small size and wide working wavelength, they are more reliable, suitable to use in passive optical network fiber optic splitting.

Major differences between PLC splitters and FBT splitter
1. Technology behind FBT Splitter and PLC splitter.
FBT splitter: Fused biconical taper, this is traditional technology to weld several fiber together from side of the fiber.
PLC splitter: Planar waveguide is a micro-optical components product, using lithography, the semiconductor substrate in the medium or the formation of optical waveguide, to achieve branch distribution function.

2. Disadvantages and advantages between FBT and PLC.

We supply both FBT splitter andfiber PLC splitter, with SC, FC, LC, ST, UPC, APC,PC,etc connectrors. single window, dual window,fiber optic couplers.

Posted by: mikofy at 04:06 AM | No Comments | Add Comment
Post contains 498 words, total size 4 kb.

Low smoke zero halogen (LSZH or LSOH) is a material classification typically used for cable jacketing in the wire and cable industry.LSZH cablejacketing is composed of thermoplastic or thermoset compounds that emit limited smoke and no halogens when exposed to high sources of heat (ie. flame).

Most network cables are insulated with polyethylene, PVC or Thermoplastic Urethane (TPU) . In fires, a halogen-containing plastic material releases hydrogen chloride, a poisonous gas, which forms hydrochloric acid when it comes in contact with water. Designated Halogen-free cables, on the other hand, does not produce a dangerous gas/acid combination or toxic smoke when exposed to a flame. Low smoke zero halogen cable reduces the amount of toxic and corrosive gases emitted during combustion. These types of materials are typically used in poorly ventilated areas such as aircraft or rail cars. Low smoke zero halogen is becoming very popular and in some cases a requirement in instances where the protection of people and equipment from toxic and corrosive gasses is critical.

Fires on board vessels can produce toxic gases and heavy smoke. Our marine low smoke, zero halogen cable can minimize the effects from these dangers. Save lives, protect your equipment from damage, and meet specifications that require use of LSZH cable. This cable is a low-cost alternative to the military spec cable often used in commercial applications.

Low Smoke Zero Halogen (LSZH) cables or low smoke & fume (LSF) cables is used in applications such as Central Offices, Mass Transit Rail Systems, Nuclear Plants and Oil Refineries or in any other application where the protection of people and equipment from toxic and corrosive gasses is critical. Low Smoke Zero Halogen cable is often lighter, so overall cable network system weights can be reduced and the environmental impact of halogen free cabling can be lower if there are fewer toxic chemicals.

In summary, the LSZH cable has four ascendant performance, as follows:

Superior overall performance of the one: On environmental cracking phenomenon. Products in use when cracking occurred, seriously affect the service life of the cable. The environmental cracking phenomenon is a complex issue affected by many factors. Generally that is closely related to the causes and products processed LSZH sheath of residual stress, phase interface debonding and resin hardening and embrittlement.Fiber optic manufacturerIngellen supplies breaking elongation of greater than 200% and extraordinary aging properties to overcome this phenomenon provides a useful. Superior overall performance of the two: The outstanding thermal deformation properties the hold when heated smallest nature of the thermal deformation undoubtedly has its value in use. Under conditions of heat stress experiments show that up to 90 ° C or 100 ° C standard. Moreover, in the not pressed condition under the heat deformation properties are more prominent. Free Hanging conditions such as 120 ° C after 240 hours the same, while a large number of similar products mud off and was soon heat only 3-4 hours. Superior overall performance of the three: High flame retardant Low Yat smoke performance to meet IEC 1034 standard.

Superior overall performance of the four: Available for different user to select a wide range of rheological properties.

Posted by: mikofy at 04:03 AM | No Comments | Add Comment
Post contains 531 words, total size 4 kb.

SFP plussmall form factor pulggable is a hot-pluggable transceiver used for telecommunication. SFP plus is an upgraded version of the former SFP transceivers (MINI GBIC). SFP plus, with higher data rate and new industrial standards, targets at the application of 10Gbps Ethernet and 8.5Gbps Fibre channel. SFP+ ensures the 10Gbps data transmission and the most densely installation capability as well as the lowest cost, currently it is well acknowledged as the ultimate choice for the 10Gbps fiber optic transceivers.

SFP+ is smaller than any of the currently shipping form factors and provides the highest density per line card. The SFP+ transceivers are ideally suited for datacom and storage area network (SAN/NAS) applications based on the IEEE 802.3ae and Fibre Channel standards, Fiber Channel 10G, 8.5G, 4.25G, 2.125G, 1.0625G, 10G BASE-SW/SR/LR/ER, 1000 Base-SX Ethernet. Our SFP plus transceivers are fully compliant with the SFP+ MSA.

10G SFP+ Moduletransceivers are used for high speed 10Gigabit Ethernet, linking the equipment to fiber optic networks. Several industrial acknowledged standards for SFP plus has been made for 10Gpbs networks. Typical products are the Cisco SFP 10G SR and Cisco SFP 10G LR, both transceivers are fiber optic type, SR SFP+ defines the SFP plus transceiver working with OM3 10G multimode fiber at 30 to 300 meters range, LR SFP+ defines the SFP plus transceiver working with single mode fiber at 10km range, SR SFP+ bear beige color with max 300 meters working distance. 10Gbase-LRM which defines the FDDI multimode fiber at around 220 meters range.

Ingellen has a large selection of SFP+ transceivers, such as SFP+ MM 300m, SFP+ 10km, SFP+ 20km, SFP+ 40km, CWDM SFP+, DWDM SFP+, BiDi SFP+, and series of Compatible Brands such as Cisco compatible, Juniper Compatible, HP compatible, Dell compatible SFP plus transceivers. SFP+ transceivers that are fully compatible with industrial standards, they feature good price and excellent performance.

OurCisco SFP+equivalents are equal performance but much more competitive prices. We have these products in stock for immediate delivery for small quantity requirement, even for big quantity the delivery could be fast.

Posted by: mikofy at 06:17 AM | No Comments | Add Comment
Post contains 345 words, total size 3 kb.

The component is part of small-scale, machine and instrument, itself usual is composed of several members, and can be used in the same series products; we general refers to electrical, radio, meter and some parts of the industry etc. Certainly component is divided to passive component and active component. Next, I would like to talk about their different from several aspect.

Follow the definition
Thepassive componentsare electronic elements that can display the characteristics without the need for external power case.The active component is also a electronic element, when it is operating and have power source in it, it called active component.
Follow the circuit nature
The passive component has two basic features: 1)itself or consume the electricity, or take the electricity transform a different energy. 2) just need to input signal, it works without need to external power source. The active component has also two basic features: 1) itself can also consume the electricity. 2) except input signal, if you want to works and have to external power source.
Follow the product
The passive component has resistor, resistor network, capacitor, inductor, tansformer, relay, key, speaker, switch, connector, socket, line, pcb and so on. Passive components are primarily resistance class inductor class, and capacitor element. The active component has Diode, Light-emitting diodes, thyristors, Transistor, IC, operation amplifier, comparator, flip－flop, counter, digital signal processor, dsp and so on.
Follow the functions
The passive components effect can be summed up that to connect the optical waveguide or optical path; control light propagation direction; to control the distribution of optical power; control between optical waveguide between the device and the optical coupling between the waveguide and the device; combined wave and the partial wave and so on.

The active components effect primarily a front-end equipment, the transmission network of the amplifier, over current splitter, feeding electric amplifier and the optical transmitter, a receiver, etc.. While the amplifier is the access network used, the most widely used active devices, it is the role when the television signal transmitted from the cable after a certain distance, due to a transmission attenuation characteristics of the cable, so that the television signal more Lei lower, when the low to a predetermined level, must be coupled with an amplifier, amplifies the signal and then down transmission. Play a the signal amplifying role and purpose of long-distance transmission of a television signal. In short all oscillation, amplification, modulation, demodulation, and current transformation active components are inseparable.

Thus, active devices and passive components on the circuit conditions require the work of a completely different way. Passive and active concept not only in electrical components, this concept both in the fields of mechanical, fluid, thermal, acoustic.

Posted by: mikofy at 06:14 AM | No Comments | Add Comment
Post contains 452 words, total size 3 kb.

The Cisco Coarse Wavelength-Division Multiplexing (CWDM) Gigabit Interface Converter (GBIC)/Small Form-Factor Pluggable (SFP) solution allows enterprise companies and service providers to provide scalable and easy-to-deploy Gigabit Ethernet and Fibre Channel services in their networks. The product contributes to enable the flexible design of highly available and multiservice networks.

TheCWDM SFP(short for small form-factor pluggable) is a compact optical transceiver used in optical communications for both telecommunication and data communications applications. It is a popular industry format supported by several fiber optic omponent vendors. CWDM SFP use the SFP interface to connect the equipment and use dual LC PC fiber connector interface to connect the optical network. Typical CWDM SFP transceiver include CWDM SFP 1470, CWDM SFP 1490,CWDM SFP 1510,CWDM SFP 1530,CWDM SFP 1550, CWDM SFP 1570, CWDM SFP 1590,CWDM SFP 1610. These CWDM SFP are fully compatible with IEEE 802.3z for 1000Base-X standards and compatible with Fiber Channel Draft Physical Interface Specification.

Cisco CWDM SFP is a series of single mode transceiver cover from 1470 to 1610nm wavelength applications, they are different colors to identify them, these CWDM SFP are used for Gigabit Ethernet and 1/2Gbps Fibre Channel applications, we supply the Cisco CWDM SFP equivalent SFP transceivers. There are 8 type different Cisco CWDM SFP transceivers from 1470nm to 1610nm. We supply the Cisco CWDM SFP equivalent transceivers. They are compliant to ITU-T G694.2 CWDM grid and 1000Base Ethernet standards as defined in IEEE 802.3 as well as Fibre channel Draft physical interface specifications. The transceiver consists of three sections: an uncooled CWDM DFB laser transmitter, an APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472.

The CWDM SFP transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. The main feature of CWDM (Coarse Wavelength Division Multiplexing) standard is that the signals are not spaced appropriately for amplification by EDFAs. CWDM is the creation of GBIC transceivers and SFP transceivers utilizing standardized CWDM wavelengths.

Ingellen.com is a leading manufacturer & supplier of CWDM SFP transceivers. Based on the MSA SFF-8472 standard, Ingellen’s CWDM Pluggable Optical Transceivers support digital diagnostic capabilities, providing enhanced diagnostic information to assist network administrators with network maintenance and management. When used in iconverter modules managed by Ingellen’s NetOutlook SNMP Network Management Software with an Graphical User Interface or third party SNMP software, Ingellen CWDM Pluggable Optical Transceivers can collect enhanced, real time optical diagnostic information including fiber optic TX and RX power, voltage and transceiver temperature.

TheCisco CWDM SFPtransceivers are high performance, cost effective modules supporting data-rate of 1.25Gbps and 80km transmission distance with SMF. All modules are compatible with class I laser safety requirements.

Posted by: mikofy at 04:30 AM | No Comments | Add Comment
Post contains 450 words, total size 4 kb.

Posted by: mikofy at 04:23 AM | No Comments | Add Comment
Post contains 627 words, total size 5 kb.

GBIC, short for GigaBit Interface Converter, is a input/output transceiver used with one end to plug into a gigabit Ethernet port such as on the switches, the other end of the transceiver is to connect the fiber optic patch cords and link the fiber optic networks. The performance of the GiBC module is to transform the signals between the Ethernet network and fiber optic network.

AGBIC moduleallows a user to reconfigure fiber links, configure tailor receiver costs, link networking distances and organize network topologies based on set requirements. It acts as a transceiver that turns electric currents into optical signals, before changing those optical signals into digital electric currents. Used on a fiber optic or an Ethernet system, GBIC modules can be upgraded, swapped out or plugged in without turning off the computer. This flexibility eliminates the need to replace entire system networking boards. The process was created to simplify switch and hub design. Each GBIC module is in place for making system administration of electro-optical communication networks easier.These modules plug directly into a system.

Generally GBIC fiber optic end the interface is SC type, the laser unit in GBIC module can be 850nm VCSEL, 1310nm FP, 1310nm DFB, and 1550nm DFB. Data transfer rates vary on GBIC module model specifications, but they have a minimum of 1 gigabit per second. Manufacturers, such as Ingellen, make GBIC modules with varying transfer speeds.

IngellenGBIC transceiveris fully compliant with Gigabit Interface Converter (GBIC) specification SFF-8053, Rev 5.5. A gigabit interface converter (GBIC) is a standard for transceivers, commonly used with Gigabit Ethernet and fiber channel. By offering a standard, hot swappable electrical interface, one gigabit ethernet port can support a wide range of physical media, from copper to long- wave single-mode optical fiber, at lengths of hundreds of kilometers.GBIC transceiver is hot pluggable, this feature allows a suitably designed enclosure to be changed from one type of external interface to another simply by plugging in a GBIC having the alternative external interface. The GBIC transceivers are suitable for interconnections in the Gigabit Ethernet hubs and switches environment.

Features for typical types GBIC modules:
Compliant with Gigabit Interface Converter (GBIC) Revision 5.5;
Compliant with proposed specifications for IEEE 802.3z/Gigabit Ethernet;
Up to 1.25Gb/s bi-directional data link;
Various kinds of wavelength and working distances optional;
Extended power supply +3.3/5.0V compatible;
Hot pluggable;
Low EMI;
Low power dissipation;
Class 1 Laser Product Compliant with the Requirements of IEC 60825-1 and IEC 60825-2.

Ingellen CWDM GBIC transceivers work with wavelength from 1470nm to 1610nm, they are with same size and package but different colors to identify. All the CWDM GBIC transceivers are compatible with IEEE 1000Base-X standards and hot pluggable, easy for deployment and maintenance in Gigabit Networks. We supply Ingellen CWDM GBIC equivalent transceivers; these products include CWDM GBIC 1470, CWDM GBIC 1490, CWDM GBIC 1510, CWDM GBIC 1530, CWDM GBIC 1550, CWDM GBIC 1570, CWDM GBIC 1590 and CWDM GBIC 1610, each bear different colors to identify them easily.

Ingellen is an original manufacturer of GBIC transceiver, we have sufficient optical transceiver modules in stock, and ready to ship upon your request. We supply various kinds of GBIC module 100% compatible with Cisco, HP, 3COM, Netgear, Nortel, Extreme.CWDM GBIC, BIDI GBIC , Mini GBIC also in stock. We have years experiences in offering GBIC transceiver, we can provide a lifetime advance replacement warranty as well as life time technical supports for GBIC transceiver. Every transceiver module will be tested before shipping, we guarantee all of our GBIC transceiver can be 100% compatible with your networking devices.

Posted by: mikofy at 06:42 AM | No Comments | Add Comment
Post contains 599 words, total size 5 kb.

Copper SFPtransceiver is high performance, cost effective module compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE 82. 3-22 and IEEE 82.3ab, which supporting 1Mbps data- rate up to 1 meters reach over unshielded twisted-pair CAT 5 cable. The module supports1 Mbps (or 1/1/1Mbps) full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 25Mbps on each pair. The module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of Ah via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address ACh.

Copper Small Form Pluggable (SFP) transceiver module is specifically designed for converting 100Base-FX NRZI port interface to 10/100Base-TX interface with RJ-45 connector. The transceiver module is compliant with the SFP MultiSource Agreement (MSA)and IEEE802.3u. With the hot pluggability, the module offers a flexible and easy way to be installed into SFP MSA compliant ports at any time without the interruption of the host equipments operating online.

Description:
100m transmission over unshielded twistedpair (UTP) Category 5 Cable;
Support intelligent auto-negotiation 1000BASE-T operation in host systems;
SGMII interface;
Hot-pluggable capability;
SFP/GBIC form with compact RJ-45 connector;
With spring latch for high density application;
Very low EMI and excellent ESD protection;
+3.3/5V single power supply;
Low power dissipation;
Operating case temperature: 0 to +70;
Detailed product information in EEPROM;
RoHS compliant.

Applications:
1) LAN 1000Base-T;
2) Switch to Switch interface;
3) Switched backplane applications;
4）Router/Server interface.

In ingellen, the copper SFP transceiver is a type of copper transceiver, our copper SFP products are 100% compatibility with all major brands, such as Cisco, HP, Juniper, Extreme, Dell…, They support 1000 Mbps data rate, for a distance of up to 100 meters reach over unshielded twisted-pair category 5 cable. The module supports1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. The module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address A0h. Ingellen1000Based-T copper SFPis also available for RoHS compliant products and is completely compliant with SONET/SDH recommendations for OC -48 specifications. If you are interested and we are pleased you came to visit our site www.ingellen.com

Posted by: mikofy at 06:41 AM | No Comments | Add Comment
Post contains 421 words, total size 3 kb.

At IngellenFiber optic products, we design, manufacture and market a broad range of high performance fiber optic products and integrated modules for the optical network equipment market. Our products enable emerging and leading communications equipment manufacturers to deliver optical networking systems to the rapidly growing long-haul, metropolitan and last-mile access segments of the communications network. Our broad product line of active and passive optical components includes interconnect systems, couplers and splitters, thin film DWDM components and modules, fixed and variable optical attenuators. We offer a wide selection of fiber optic equipments, our main areas including: fiber optic cable, optical transmitter, EDFA, optical receiver, fiber optical media converter, interface converter, fiber optic modem, PDH optical multiplexer, fiber optic patchcord, fiber optic pigtail, fiber optic attenuator,optical adaptor, optical coupler, fiber optic splice closure, fibre optic termination box, ODF, patch panel, fiber optic fusion splicer, fiber cleaver, fiber optic toolkit, OTDR, fibre optical light source, optical power meter, optical fiber identifier, visual fault locator, optical talk set, signal level meter, GEPON, OLT, ONU, PLC Splitter, WDM etc.

These advanced fiber optic systems include fiber optic cable, connectors, adapter modules, adapter panels, cassettes, enclosures, patch cords, cable assemblies, cable distribution products and accessories for both singlemode and multimode applications. Together, these components provide complete solutions for today’s high data rate Fibre Channel and Ethernet applications, and support future readiness for 40 Gb/s and 100 Gb/s data rates, maximizing physical infrastructure performance, modularity, and scalability. Also our extensive product offering includes a full range of solutions including Connectors and Adapters, Assemblies, Backplanes, Optical Circuitry, Termination Kits and Tooling.

Ingellen is a leading fiber optic supplier specialize in manufacturing and sales of fiber optic cable and related fiber optic equipments since 2005, the company is known as thefiber optic manufacturerwhile satisfing customers over the years by focusing on the quality of our fiber optic products and the timeliness of our delivery. Ingellen has over the years been working on our Fiber Optic products. We always insist and emphasis on the principles of service, quality, innovation and business continuity and keep optimum status to provide the best service to our clients. Ingellen's experience and resources provide customers a wide range of design, manufacturing and value-added services.

We have been putting a lot of investments to keep pace with industry standards. With high quality raw materials, advanced manufacturing equipment adopted and our highly skilled workers, we ensure every piece of our products is with excellent quality and looking, and we ensure the fastest delivery. We fully understand our success is dependent on our customers satisfaction, we are always ready to do the best to maintain the customers loyalty. You can truly count on our commitment to excellence. Looking forward to have a long term business relationship with any of our customers.Just visit on our website for more information about our products. Any inquiry or phone call is welcomed all the time. We will reply to you as soon as possible.

Posted by: mikofy at 03:39 AM | No Comments | Add Comment
Post contains 496 words, total size 4 kb.

Thefast media converterstransparently connect one type of media, or cabling, to another – typically copper to fiber. Available in stand-alone, modular chassis-based, or PCI powered configurations. By bridging the gap between legacy copper infrastructures and fiber growth.

Fast Ethernet to Fiber Media Converters characters:

IEEE 802.3 compatible 10BASE-T UTP or 100BASE-TX to Fast Ethernet fiber converter. Supports multimodle, single-mode, and single-fiber with different reach option.
UTP port supports programmable 10/100 Half or Full-Duplex auto-negotiation with crossover options.
Supports jumbo frame of up to 1916 bytes.
Hot-swappable with remote converter power dying gasp alarm.
Supports OAM sub-layer which confirms to TS-1000 specification from TTC (Telecommunication Technology Committee).
Remote converter configuration and status monitoring using in-band OAM frame and not consuming any IP resource and link bandwidth.
Sends and receives OAM frames to center or remote side.
Loopback mode to support loopback packet from center side to remote side.
Programmable link fault pass-through (LFP) or remote fault detection (RFD) function.
Link transparency to indicate the link down from link partner with LED display for immediate visual status of each port.
SFP internal ID and status monitoring capability.
Dual power supply option with power on/off alarm.
Advanced Features: Link Pass-Through, Far-End Fault, Auto-MDIX and Loopback
Extend the transmission distance to several kilometers or hundred kilometers.
Fast media converters make an invisible component in the physical layer "visible” to network managers; allowing more efficient troubleshooting and less on-site maintenance.

Applications

1. apply to ready to rise to 10M extended enterprise network bandwidth 100M
2. Telecommunications
3. Local area network
4. widely used for computer data transmission network to meet a variety of business needs
5. apply to the campus broadband network, broadcasting network and intelligent residential broadband fiber-to-floor fiber to the home data transfer
6. with the switches and other computer network equipment can be combined to form-chain, star, ring-type network and other computer networks.

Ingellen’sfast Ethernet media converterprovide an economical path towards extending the distance of an existing network, extending the life of non-fiber based equipment, or extending the distance between two like devices.

Posted by: mikofy at 03:38 AM | No Comments | Add Comment
Post contains 348 words, total size 3 kb.