10G fiber optic transceivers are designed for 10G 10Gbit/s data transmission applications including 10 Gigabit Ethernet, 10 Gbit/s Fiber Channel, Synchronous optical networking. After years of 10 gigabit Ethernet's existence, there have been various different form factors and optics types introduced. Nowadays, 10G transceivers series mainly includes 10G Xenpak, 10G X2, 10G XFP and10G SFP+. XENPAK was the first MSA for 10GE and had been the largest form factor. X2 was later competing standards with smaller form factors. XFP came after X2 and it is also smaller. SFP+ offer a much smaller form factor and the ability to offer 1G/10G combo ports on hardware. This is a guide to these module types and optical standards currently available.

10G Xenpak
Xenpak is 10G fiber optic transceiver, it support all optical ports as defined in IEEE 802.3ae, supporting speed 10.3 Gb/s,9.95 Gb/s or4×3.125 Gb/s. XENPAK modules designed XAUI interface and data shaping (CDR) function, which comply with the XENPAK MSA protocol and meet the application of 802.3ae Ethernet protocol 10GB.

The 10G XENPAK optical modules include XENPAK 10GBASE-SR 300 meters (multimode OM3 fiber), XENPAK 10GBASE-LRM multimode fiber 220 meters, XENPAK 10GBASE-LR single-mode fiber 10-20km, XENPAK 10GBASE-ER single-mode fiber 40 km, XENPAK 10GBASE-ZR single-mode fiber 80km.

10G X2
X2 defines a smaller form-factor 10 Gb/s pluggable fiber optic transceiver optimized for 802.3ae Ethernet,ANSI/ITUT OC192/STM- 64 SONET/SDH interfaces,ITUT G.709,OIF OC192 VSR,INCITS/ANSI 10GFC (10 Gigabit Fibre Channel) and other 10 Gigabit applications.X2 is initially focused on optical links to 10 kilometers and is ideally suited for Ethernet,Fibre Channel and telecom switches and standard PCI (peripheral component interconnect) based server and storage connections. X2 is physically smaller than XENPAK but maintains the mature electrical I/O specification defined by the XENPAK MSA and continues to provide robust thermal performance and electromagnetic shielding.

The10gb x2fiber optic transceivers series include X2-10GB-SR, X2-10GB-LR, X2-10GB-ER and X2-10GB-ZR, they are designed based on the X2 MSA and IEEE802.3ae. They are designed for the integrated systems solution provide, fiber optics distributor and other IT distributors.

10G XFP
XFP is a standard for transceivers for high-speed computer network and telecommunication links that use optical fiber. They typically operate at near-infrared wavelengths (colors) of 850 nm, 1310 nm or 1550 nm. Principal applications include 10 Gigabit Ethernet, 10 Gbit/s Fibre Channel, synchronous optical networking (SONET) at OC-192 rates, synchronous optical networking STM-64, 10 Gbit/s Optical Transport Network (OTN) OTU-2, and parallel optics links. They can operate over a single wavelength or use dense wavelength-division multiplexing techniques. They include digital diagnostics that provide management that were added to the SFF-8472 standard. XFP modules use an LC fiber connector type to achieve high density.

The10G XFPfiber optic transceivers series include XFP 10G MM SR, XFP 10GLR OC192SR, XFP 10GER OC192IR and XFP-10GZR-OC192LR.

10G SFP+
10G SFP+ transceivers are multi-purpose optical modules for 10Gbit/s data transmission applications at 850nm, 1310nm and 1550nm. The transceivers are ideally suited for datacom and storage area network (SAN/NAS) applications based on the IEEE 802.3ae and Fibre Channel standards, Fiber Channel 10G, 8.5G, 4.25G, 2.125G, 1.0625G, 10G BASE-SW/SR/LR/ER, 1000Base-SX Ethernet.

The 10G SFP+ fiber optic transceivers series include SFP-10G-SR, SFP-10G-LRM, SFP-10G-LR , SFP-10G-ER, SFP-10G-ZR, SFP-10G-LW, SFP-10G-LH, SFP-10G-LX and SFP-10G-ZW.

Posted by: mikofy at 06:49 AM | No Comments | Add Comment
Post contains 530 words, total size 4 kb.

GBIC Transceiver( gigabit interface converter), one of the many types of transceivers, is a media conversion device between a gigabit Ethernet network and a separate fiber optic based network. Via the GBIC transceiver, Gigabit network equipment can directly connect to copper wires, single mode fiber ports or multimode fiber ports.

Main Features
Generally GBIC fiber optic end the interface is SC type, the laser unit in GBIC module can be 850nm VCSEL, 1310nm FP, 1310nm DFB, and 1550nm DFB. GBIC module can be changed from one type of external interface to another simply by plugging in a GBIC having the alternative external interface. The GBIC transceivers are suitable for interconnections in the Gigabit Ethernet hubs and switches environment. The design of these converters is also practical for other high performance, for example, point-to-point communication applications that involve interconnecting components and
exchanging data between Ethernet and fiber optic networks.

Changing from one type to another is simple because a GBIC transceiver can be removed and installed without turning off the power. Generalized enclosures may be compatible with various transceiver types. It is not complicated to operate, and the digital data transmitter and receiver functions at high speeds. Some models can provide a bi-directional data connection of up to 1.25 gigabits/second, so there is great compatibility with high-speed networks. Compatibility with common power supplies, such as +3.3 and +5.5 volt ratings, extends this compatibility even more.

Other important features of a GBIC transceiver which add to energy efficiency initiatives are that the unit offers low power dissipation and emits little electromagnetic interference. Each device can install and function without disrupting anything, but this plug and play capability can be offset by the need to disconnect patch cords before it is installed or taken out. Power surges and data discrepancies can occur, and it’s always wise to take precautions to avoid this as much as possible, especially in high-density networks.

Industrial Standard
GBIC has its multi sources agreement as the industrial standard, this help manufacturers save cost to develop their each own standard and solve the problem of compatibility. All of the different modules by various manufactures are developed based on industrial standard. This means that they can all be compatible with the same network and with each other to meet data communications requirements. By offering a standard, hot swappable electrical interface, one gigabit port can support a wide range of physical media, from copper to long-wavesingle-mode optical fiber, at lengths of hundreds of kilometers.

GBIC classification is based on its working wavelength, data transmitting rate, working power, and the working distance. The device is characterized by features, such as the wavelengths it can handle, how fast and efficiently it transmits data, the power it needs to operate, and what distance it can transmit data over. These are the main factors to consider when buying a GBIC transceiver to be sure it meets network performance requirements.

Ingellen supplies various kinds of GBIC fiber optic transceivers products, including single mode GBIC, multimode GBIC and copper GBIC with compatibale brands like Cisco, HP and so on. We haveCWDM GBICtransceivers that are with different operation wavelength. EachGBIC Transceiver Moduleis compliant to industrial standard and they are compatible to use with fiber optical equipments from other major companies like Cisco, Juniper, etc.

Posted by: mikofy at 06:34 AM | No Comments | Add Comment
Post contains 550 words, total size 4 kb.

A fiberoptical transceiveris a device used to send and receive optical information. By using an optical transceiver, network spend less space and steer clear of the necessity of getting a transmitter and receiver in the network. Able to transmitting information further and faster than older models, the more recent transceivers are utilized and appearance, creating more compact, smaller sized modules than ever before.

How Do Fiber Optic Transceivers Work
A fiber optic transceiver is a accessory acclimated to forward and accept optical information. There are a number of different components on one of these devices, including a light source and an electrical component. The transceiver has two ends, one that an optical cable plugs into and accession for abutting an electrical device. Fiber optic transceivers combine a fiber optic transmitter and a fiber optic receiver in a single module. They are arranged in parallel so that they can operate independently of each other. Both the receiver and the transmitter have their own circuitry and can handle transmissions in both directions.

In fiber optic data links, the transmitter converts an electrical signal into an optical signal, which is coupled with a connector and transmitted through a fiber optic cable. The light from the end of the cable is coupled to a receiver, where a detector converts the light back into an electrical signal. Either a light emitting diode (LED) or a laser diode is used as the light source.

How to Select Fiber Optic Transceivers
Fiber optic transceivers are designed for use with single mode or multi-mode cable. There are a number of different types of fiber optic transceivers available. They differ in the types of connections as well as in the quality of data transmission. Speed of transmission may also change from device to device. So it is necessary to choose the right fiber modules for your network.

Single-mode fibers (SMF) transmit infrared (IR) laser light at wavelength from 1,300 to 1,550 nm. They have small cores and are used withlaser sources for high speed, long distance links.
Multimode fibers have larger cores and are used mainly with LED sources for lower speed, shorter distance links. The typical transmission speeds and distance limits are 100 Mbit/s for up to 2km, 1Gbit/s to 220-550m, and 10Gbit/s to 300m.
Products that can be used with both types of optical fiber are also available.

Ingellen provides not only the classical 1x9 footprint duplex package but also advanced packages such as SFP (small form-factor pluggable) transceiver module(like1000Base-T copper SFP), GBIC (Gigabit Interface Converter) fiber transceiver, BIDI (single fiber bi-directional) fiber optic transceiver, BIDI-SFP transceiver module, and BIDI-GBIC transceiver, SFP+ transceiver module, XFP optical transceiver, Xenpak optical transceiver, X2 transceiver module. In addition, optical transceivers with Digital Diagnostic Function are also available. Allfiber transceiversare RoHS compliant and could be 100% compatible with branding equipment, such as Cisco, Extreme, Juniper, HP, H3C, Linksys, Huawei, Alcatel-Lucent, Foundry, Nortel, Force10 etc.

Posted by: mikofy at 06:22 AM | No Comments | Add Comment
Post contains 490 words, total size 4 kb.

Xenpaktransceiver, one of the first generation 10G fiber optic transceivers, supports all optical ports as defined in IEEE 802.3ae, supporting speed 10.3 Gb/s,9.95 Gb/s or4×3.125 Gb/s. XENPAK, remain very popular as the install base is large, while the newest SFP+ offer a much smaller form factor and the ability to offer 1G/10G combo ports on hardware for the first time. Also, X2 transceiver is the successor to the XENPAK.

Xenpak transceiver is protocol-specific: Either 10G Ethernet or 10G Fibre Channel versions are available. Xenpak transponders are used in datacom optical links only (not telecom). Its electrical interface to the host board is also standardized and is called XAUI (4 x 3.125 Gb/s). Xenpak transceiver is packed in a 4.8×1.4×0.7 inch package, used DFB laser components, Xenpak working distance via G652 multimode fiber could reach up to 10km, another important components inside the Xenpak is the MUX/DEMUX parts, it consume 50% of the power and result in the bigger size. There arevarious kinds of 10G Xenpak transceivers, typical types include the Xenpak 10GB SR , with 300 meters working span; Xenpak 10GB LR , with 10km working distance; Xenpak 10GB ER, with 40km working distance and the 80km Xenpak 10GB ZR.

Xenpak 10GB SR
XENPAK 10GB SR is a multimode 10GB fiber optic transceiver. It supports a link length of 26m on standard FDDI grade MMF. Up to 300m link lengths are possible when using 2000 MHz/km MMF (OM3).
Xenpak 10GB LR
Xenpak 10GB LR is 10GB single mode fiber optic transceiver. The XENPAK-10GB-LR is a highly integrated serial optical transponder module for high-speed, 10Gbit/s data transmission applications. 4×3.125Gbps Ethernet Signal Input by XAUI Interface.
Xenpak 10GB ER
Xenpak 10GB ER is 40km single mode transceiver for 10G networks. Xenpak 10GB ER transceivers is a 10GB hot swappable transceiver use duplex SC interface, it works with 1550nm single mode fiber for a max 40km working distance.
Xenpak 10GB ZR
The Cisco compliant XENPAK-10GB-ZR is a 10GBASE-ZR XENPAK 1550nm 80km transceiver module. The XENPAK-10GB-ZR transceiver module provides a low cost high-performance connection.

Ingellen is an original manufacturer of XENPAK transceiver, who has many years experiences in offering XENPAK transceiver. Ingellen's XENPAK transceivers are highly integrated, serial optical transponder modules designed for high-speed, 10Gbps data transmission applications. The modules are fully compliant with the IEEE 802.3ae standard making it ideally suited for 10GbE datacom applications. Futher, from Ingellen Corporation you can easily find other 10G modules like 10g sfp transceiver, 10g sfp+ transceiver,10g xenpaktransceiver, 10g xfp transceiver,10gb x2transceiverand so on.

Posted by: mikofy at 06:50 AM | No Comments | Add Comment
Post contains 422 words, total size 3 kb.

XFP Optic Transceiveris the 10Gigabit small form pluggable transceiver, which is protocol independent optical media conversion equipment. XFP modules are designed for single mode fiber and operates at a nominal wavelength of 850/1310/1550 nm. They can operate over a single wavelength or use dense wavelength-division multiplexing techniques. They are widely used in 10 Gigabit Ethernet, 10 Gbit/s Fibre Channel, synchronous optical networking (SONET) at OC-192 rates, synchronous optical networking STM-64, 10 Gbit/s Optical Transport Network (OTN) OTU-2, and parallel optics links. Nowadays, XFP is the most compact size and low cost 10G transceivers.

10g XFP feature its most compact size and most economic prices compared with its former 10g transceivers and this help it took a lot of the market. 10 Gigabit Ethernet port on the switches and routers are usually independent and can be installed with pluggable fiber optic transceiver modules, which make it more convenient for end users.

10g XFP is the small form factor pluggable transceiver designed for the 10 gigabit network applications. When IEEE 802.3ae was made in 2002, Ethernet standards had expanded to the 10ge, the 10g Ethernet increased the data rate by 10 times than gigabit Ethernet and the working distance also enlarged a lot compared with before. 10g XFP is designed based on these standards, and will also support OC192/STM-64 and 10G Fibre Channel. Typical 10g XFP in the market include SR, LR, ER, ZR versions.

XFP 10G MM SR
XFP SR is 10Gbps fiber optic transceiver working at 850nm wavelength, XFP SR typical working distance is 300 meters; XFP SR is suitable for use in 10G datacom (belly-to-belly for high density applications) and storage area network (SAN/NAS) applications based on IEEE 802.3ae and Fiber Channel standards.
XFP 10GLR OC192SR
XFP LR is hot swappable fiber optic transceiver used for 10G networks like 10 Gigabit Ethernet, SDH, SONET, XFP LR support data transfer rate from 9.95Gbps to 11.1Gbps, max working distance of the XFP LR fiber transceiver is 10km.
XFP 10GER OC192IR
XFP ER adopts cooled EML laser diode and PIN photodiode, XFP ER is 10G fiber optic transceiver which is fully compatible with XFP MSA and IEEE 802.3ae-2002, max working span of the XFP ER is 40km.
XFP-10GZR-OC192LR
XFP ZR is 10Gbps fiber optic transceiver which is compatible with IEEE 802.3ae and Fiber Channel standards, XFP ZR use single mode optical fiber and its max working span could reach 80km, XFP ZR use 1550nm working wavelength, this fiber optic transceiver use dual LC fiber interface and the other end of the module could fit into relevant XFP slots or ports.

Ingellen offers the whole series of10G XFPfiber optic transceivers, including: XFP 10GBASE-SR 300M (MMF OM3); XFP 10GBASE-LRM MMF 220M; XFP 10GBASE-LR SMF 10-20KM; XFP 10GBASE-ER SMF 40KM; XFP 10GBASE-ZR SMF 80KM; 18 Channels CWDM XFP; 40 Channels DWDM XFP; BIDI XFP; etc.10Gbps XFP Moduleis made according to the multi source agreement (MSA). Ingellen also manufacture original XFP MM 300m, XFP 10km, XFP 20km, XFP 40km, XFP 80km, XFP 120km, CWDM XFP, DWDM XFP, WDM XFP, BiDi XFP, single fiber XFP and series of compatible XFP transceivers such as Cisco XFP, 3Com XFP, Juniper XFP, Foundry XFP, Extreme XFP, Dell XFP, Finisar XFP and more.

Posted by: mikofy at 06:37 AM | No Comments | Add Comment
Post contains 536 words, total size 4 kb.

SFP (small form-factor pluggable) is a popular industry format jointly developed and supported by many network component vendors.SFP transceiveris designed to support SONET, Gigabit Ethernet, Fibre Channel, and other communications standards.

Main Features:
Industry standard small form pluggable (SFP) package;
Immovable lock Design;
Hot Pluggable;
Duplex LC connector;
Full duplex speeds support;
TTL signal detect indicator;
3.3 VDC power supply;
Industry leading EMI performance for high port density;
Class 1 laser product complies with EN 60825-1;
RoHS compliant.

The Types
SFP Transceivers have a wide range of detachable interfaces to multimode/single-mode fiber optics, which allows users to select the appropriate transceiver according to the required optical range for the network. SFP has transmission rate ranging from 100Mbps to 4Gbps and it can work at distances ranging between 500 meters to hundreds of kilometers. Optical SFP modules are commonly available in several different categories, including single mode SFP, multimode SFP and copper SFP, which are with various working wavelength and functions. Each type comes with different configurations of transmitter and receiver.

Multi-mode fiber
SX - 850 nm, for a maximum of 550 m at 1.25 Gbit/s (Gigabit Ethernet) or 150m at 4.25 Gbit/s (Fibre Channel).
Single-mode fiber
LX - 1310 nm, for distances up to 10 km;
BX - 1490 nm/1310 nm, Single Fiber Bi-Directional Gigabit SFP Transceivers, paired as BS-U and BS-D for Uplink and Downlink respectively, also for distances up to 10 km. Variations of bidirectional SFPs are also manufactured which use 1550 nm in one direction;
1550 nm 40 km (XD), 80 km (ZX), 120 km (EX or EZX);
CWDM andDWDM SFPtransceivers at various wavelengths achieving various maximum distances.
Copper fiber
1000BASE-T - these modules incorporate significant interface circuitry and can only be used for Gigabit Ethernet, as that is the interface they implement. They are not compatible with (or rather:do not have equivalents for) Fibre channel or SONET.

Suitable Applications:
Switches/bridges/routers/servers;
SONET/SDH Network;
Gigabit Ethernet;
1x/2x Fiber Channel;
Point-to-point networking;
Metro Access Rings;
Fiber-to-the-desktop (FTTD);
High-speed computer links;
LAN, SAN (local, storage area networks).

The Advantages
SFP, also called a mini GigaBit Interface Converter (GBIC), is an upgraded version of GBIC module. Since SFP is only half the size of the GBIC, making it saved more space. Any future changes can be easily incorporated into the SFP module, it is easier to change and easier for maintenance compared with traditional modules. Users can replace a single SFP module during the process instead of replace the whole board with many modules on it.

SFP optic transceiver is also available with copper cable interfaces, which allows a host device designed primarily for optical fiber communications to communicate over shielded or unshielded twisted pair networking cables. Usually such copper cable interfaces are used when the information to be transmitted needs to cover only shorter distances where use of copper cable is more economical than optic fiber cables.

Modern optical SFP transceivers support digital diagnostics monitoring (DDM) functions, also known as digital optical monitoring (DOM). This feature gives users the ability to monitor the real-time parameters of SFP, such as optical output power, optical input power, temperature, laser-bias current and transceiver supply voltage. SFP transceivers are housed in a metal enclosure and their power dissipation is low. They operate over a wide temperature range and support a large number of different types of cable. An improved version of SFPoptical transceiverstandard called SFP+ can support transmissionrates up to 10Gbps.

Posted by: mikofy at 06:42 AM | No Comments | Add Comment
Post contains 576 words, total size 5 kb.

GLC-TCopper Small Form Pluggable (SFP)transceivers offer a convenient and cost effective solution for the adoption of Gigabit Ethernet and Fibre Channel in data center, campus, metropolitan area access and ring networks, and storage area networks.

It is compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE 802.3-2002 and IEEE 802.3ab, which supports 1000Mbps data- rate up to 100 meters reach over Category 5 copper line. The Cisco SFP provides full-duplex Gigabit Ethernet connectivity to high-end workstations and between wiring closets over existing copper network infrastructure. Cisco GLC-T SFP transceiver is a hot pluggable module which with RJ45 interface, it is compatible to use with 1000Base-T application.

Cisco GLC-Toptical module features:
Up to 1.25Gb/s bi-directional data links;
Hot-pluggable SFP footprint;
Extended case temperature range (0°C to +70°C );
Fully metallic enclosure for low EMI;
Low power dissipation (1.05 W typical);
Compact RJ-45 connector assembly;
Access to physical layer IC via 2-wire serial bus;
1000 BASE-T operation in host systems with SERDES interface;
10/100/1000Mbps compliant in host systems with SGMII interface.

The GLC-T SFP transceiver supports1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All 4 pairs on the cable being used with symbol rate at 250Mbps on each pair. The GLC-T SFP transceiver provides standard serial ID information compliant with SFP MSA, and this can be accessed with address of A0h by its 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address A0h.

Ingellen original GLC-T SFP products are fully compatible with Cisco routers and switches. Each GLC-T transceiver is programmed with a unique serial number and a Cisco compatible CRYPTO code. In addition, GLC-T supplied by Ingellen is automatically rate adaptable to operation at 10, 100, or 1000Mbps speeds over up to 100 meters of unshielded twisted-pair category 5 cable. Like other fiber optic products supplied by Ingellen, the GLC-T is backed by a 3-year non- prorated warranty, free email/phone technical support and advanced replacement (with RMA) and guaranteed emergency spares.

Posted by: mikofy at 06:41 AM | No Comments | Add Comment
Post contains 341 words, total size 3 kb.

SFP+ is the enhanced version of the SFP (small form-factor pluggable), which supports data rates of up to 10Gbit/s Fiber Channel and Ethernet applications. It leaves more circuitry to be implemented on the host board instead of inside the module compared with the earlier XENPAK or XFP modules. Nowadays, 10 Gigabit Ethernet is becoming the interconnect of choice in data centers of all sizes providing key improvements in terms of bandwidth, latency, scalability, reliability and application performance.

10G SFP+ moduleis multi-purpose optical transceiver for 10Gbit/s data transmission applications at 850nm, 1310nm and 1550nm. The transceivers are ideally suited for datacom and storage area network (SAN/NAS) applications based on the IEEE 802.3ae and Fibre Channel standards, Fiber Channel 10G, 8.5G, 4.25G, 2.125G, 1.0625G, 10G BASE-SW/SR/LR/ER, 1000Base-SX Ethernet.

Key Features of 10G SFP+:
Compliant to SFP+ Electrical MSA SFF-8431;
Compliant to SFP+ Mechanical MSA SFF-8432;
Multi rate of up to 11.3Gb/s;
10G Ethernet compliance;
2G/4G/8G Fibre Channel compliance;
Transmission distance up to 10km (SM fiber);
Low power consumption: 0.85W (Typ.);
0C to +70C case operating temperature range;
Laser Class 1 IEC / CDRH compliant;
RoHS 6/6 compliant;
Compliant with product safety standards.

Ingellen offers full line of 10G SFP+ fiber optic transceivers, including: SFP+ MM 300m, SFP+ 10km, SFP+ 40km, CWDM SFP+, DWDM SFP+, BiDi SFP+, and series of Compatible Brands such as Cisco compatible, Juniper Compatible, HP compatible SFP plus transceivers. In the following is the Cisco 10G SFP+ modules among the hottest ones.

Cisco SFP-10G-SR
TheCisco SFP-10G-SRmodule supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade multimode fiber (MMF). Using 2000MHz*km MMF (OM3), up to 300m link lengths are possible. Using 4700MHz*km MMF (OM4), up to 400m link lengths are possible.

Cisco SFP-10G-SR-X
The Cisco SFP-10G-SR-X is a 10GBASE-SR module for extended operating temperature range. It supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade multimode fiber (MMF). Using 2000MHz*km MMF (OM3), up to 300m link lengths are possible. Using 4700MHz*km MMF (OM4), up to 400m link lengths are possible.

Cisco SFP-10G-LRM
The Cisco 10GBASE-LRM Module supports link lengths of 220m on standard Fiber Distributed Data Interface (FDDI) grade multimode fiber (MMF). To ensure that specifications are met over FDDI-grade, OM1 and OM2 fibers, the transmitter should be coupled through a mode conditioning patch cord.

Cisco SFP-10G-LR
The Cisco 10GBASE-LR Module supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652).

Cisco SFP-10G-LR-X
The Cisco SFP-10G-LR-X is a multirate 10GBASE-LR, 10GBASE-LW and OTU2/OTU2e module for extended operating temperature range. It supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652).

Cisco SFP-10G-ER
The Cisco 10GBASE-ER Module supports a link length of up to 40 kilometers on standard single-mode fiber (SMF, G.652).

Cisco SFP-10G-ZR
The Cisco SFP-10G-ZR is a multirate 10GBASE-ZR, 10GBASE-ZW and OTU2/OTU2e module. It supports link lengths of up to about 80 kilometers on standard single-mode fiber (SMF, G.652). This interface is not specified as part of the 10 Gigabit Ethernet standard and is instead built according to Cisco specifications.

As an experienced fiber optic manufacturer, Ingellen is capable to customize the completely Cisco compatible 10G SFP+ transceiver according to our customers' requests. Or you can choose Ingellen original 10G SFP+ transceivers as you like, which is also ideal for your networking.

Posted by: mikofy at 06:36 AM | No Comments | Add Comment
Post contains 555 words, total size 4 kb.

SFP(Small Form-Factor Pluggable Interface Converter) optic modules, are small form factor pluggable module for multi-mode fiber Fast Ethernet, plug into a variety of SFP-based POS, TDM and ATM interfaces on router products. This line of SFP optics supports the following three data rates at various reaches:OC-3/STM-1SFP (155 Mbps), OC-12/STM-4 SFP (622 Mbps), and OC-48/STM-16 SFP (2,488 Gbps).

Large economies of scale can be achieved by substituting multiple single T1/E1 trunks with a single fiber connection running at 155 Mbps, which OC-3/STM-1 does. OC-3 STM-1 is a network line with transmission speeds of up to 155.52 Mbit/s (payload: 148.608 Mbit/s; overhead: 6.912 Mbit/s, including path overhead) using fiber optics. Depending on the system OC-3 is also known as STS-3 (electrical level) and STM-1 (SDH). OC-3/STM-1 is a commonly used universal interface in the telecom community. A STM-1 or OC-3 interface will reduce overall expenses and control costs by combining data and voice applications over one circuit. These modules are also used for Fast Ethernet application. Depending on the market, the benefits can be seen as soon as you subscribe to more than 20 T1 or E1 circuits simultaneously. Ingellen offers full line of SDH OC3 SFP fiber optic transceivers which support DDM/DOM, BIDI and CWDM/DWDM. The products include:

SFP-OC3-MM=
OC-3/STM-1 pluggable short-reach (2 km) transceiver module, 1310-nm wavelength, MMF, LC connector

SFP-OC3-SR=
OC-3/STM-1 pluggable short-reach (2 km) transceiver module, 1310-nm wavelength, LC connector

SFP-OC3-IR1=
OC-3/STM-1 pluggable intermediate-reach (15 km) transceiver module, 1310-nm wavelength, LC connector

SFP-OC3-LR1=
OC-3/STM-1 pluggable long-reach (40 km) transceiver module, 1310-nm wavelength, LC connector

SFP-OC3-LR2=
OC-3/STM-1 pluggable long-reach (80 km) transceiver module, 1550-nm wavelength, LC connector

The OC-3/STM-1 Module is a highly versatile access solution, suitable for various applications, including: DSLAM backhaul, POS router interconnect, Voice exchange interconnect, Interconnect of ATM switches, SDH/SONET network bridging and Distributed cross-connect.

Ingellen is a leading fiber optic manufacturer who has rich experience in fiber optical field. Ingellen's original OC-3/STM-1 SFP transceivers are designed for Fast Ethernet & SDH STM-1&SONET OC-3, which can be used in fast ethernet switch, router and other networking equipments from Cisco and other brands like HP, Juniper and so on. The SFPs are compatible with the SONET/SDH and ATM standards, and support the digital diagnostic functions specified in the SFF-8742 Multi-Source Agreement (MSA) and the extended operating temperature range from 23 to185°F (-5 to 85°C). The OC-3/STM-1 SFP transceivers module is a high performance and cost effective fiber optic transceiver. More, you can easily find other SFP modules likeOC-12 SFPandOC-48 SFPthere. All of them can be provided with a very good price and reliable quality.

Posted by: mikofy at 07:58 AM | No Comments | Add Comment
Post contains 433 words, total size 4 kb.

Ingellen Technology supplies all kinds of optical transceivers and compatible brands like Cisco. And Cisco X2 modules are supported on Cisco switches and routers.

Main features of Cisco 10GBASE X2 modules include:
Support 10GBASE Ethernet;
Hot-swappable input/output device plugs into an Ethernet X2 port of a Cisco switch or router to link the port with the network;
Provides flexibility of interface choice;
Supports "pay-as-you-populate" model;
Supports the Cisco quality identification (ID) feature that enables a Cisco switch or router to identify whether the module is certified and tested by Cisco;
Has optical interoperability with respective 10GBASE Xenpak, 10GBASE XFP and 10GBASE SFP+ modules on the same link.

Cisco X2-10GB-SR
TheX2-10GB-SRis a Class 1 laser product, which is designed for 300m Transmission with a vertical cavity surface emitting laser (VCSEL). X2-10GB-SR, replacement for Cisco 10GBase-SR SC 300M, is a hot pluggable in the Z-direction module that is usable in typical router line card applications, Storage, IP network and LAN and compliant to X2 MSA. It fully complies with the multi-sourcing agreement (MSA) which enables it to work in all MSA compliant platforms. 10GBase-SR is the original multimode optics specification, and is still by far the most commonly used. As it uses a single, low cost solid state laser assembly, it is also the least expensive of the optical modules available for a 10GbE platform.

The Cisco 10GBASE-SR Module supports a link length of 26m on standard FDDI grade MMF. Using 2000 MHz*km MMF (OM3), up to 300m link lengths are possible. Using 4700 MHz*km MMF (OM4), up to 400m link lengths are possible. X2-10GB-SR is high performance, cost effective module supporting 300M transmission distance, also, the X2-10GB-SR is a fully integrated 10.3Gbit/s optical transceiver module that consists of a 10.3Gbit/s optical transmitter and receiver, XAUI interface, Mux and Demux with clock and data recovery(CDR). This X2-10GB-SR version of X2 transceiver line uses an 850nm Vcsel Laser Diode to achieve 300m over 50/125 multi-mode fiber as 10GBASE-SR of the IEEE 802.3ae.

Digital diagnostics functions of this X2 10gb transceivers are available via a 2-wire serial interface. Cisco X2 10GB SR transceiver is a multimode products used for 10G networks, it works with 850nm via multimode fiber. The Cisco X2 10GB SR Cisco module is a multimode transceiver target at the 10G applications. It works with 850nm multimode fiber and the optical interface is duplex SC. X2 10GB SR can link the equipment to fiber optic networks, max transmission distance is 300meters.

X2 10GB SR Features:
Compatible with X2 MSA Rev2.0b;
Support of IEEE 802.3ae 10GBASE-SR at 10.3125Gbps;
Transmission Distance up to 300m (MMF);
Vertical Cavity Surface Emitting Laser at 850nm;
SC Duplex Optical Connector;
Hot Pluggable 70-PIN Connector with XAUI Electrical Interface;
Management and control via MDIO 2-wire interface;
Power Supply :+3.3V, APS(+1.2V);
Diagnostic Optics Monitoring;
Temperature Range: 0~ 70 °C;
ROHS Compatible.

Note: For optical X2 modules, only connections with patch cords with PC or UPC connectors are supported. Patch cords with APC connectors are not supported. All cables and cable assemblies used must be compliant with the standards specified in the standards section. The X2-10GB-SR must be operatred within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug.

X2 10GB SR transceivers offered by Ingellen are tested with equipment from Cisco and other companies to make sure of its compatibility, whose products are not second hand but brand new compatible transceivers. These X2 10GB SR modules are competitive price, reliable quality and prompt delivery. You also can find other Cisco products likeCisco SFPtransceivers, Cisco GBIC transceivers, Cisco SFP+ modules and so on.

Posted by: mikofy at 06:49 AM | No Comments | Add Comment
Post contains 617 words, total size 5 kb.