Copper SFPtransceiver is high performance, cost effective module compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE 82. 3-22 and IEEE 82.3ab, which supporting 1Mbps data- rate up to 1 meters reach over unshielded twisted-pair CAT 5 cable. The module supports1 Mbps (or 1/1/1Mbps) full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 25Mbps on each pair. The module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of Ah via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address ACh.

Copper Small Form Pluggable (SFP) transceiver module is specifically designed for converting 100Base-FX NRZI port interface to 10/100Base-TX interface with RJ-45 connector. The transceiver module is compliant with the SFP MultiSource Agreement (MSA)and IEEE802.3u. With the hot pluggability, the module offers a flexible and easy way to be installed into SFP MSA compliant ports at any time without the interruption of the host equipments operating online.

Description:
100m transmission over unshielded twistedpair (UTP) Category 5 Cable;
Support intelligent auto-negotiation 1000BASE-T operation in host systems;
SGMII interface;
Hot-pluggable capability;
SFP/GBIC form with compact RJ-45 connector;
With spring latch for high density application;
Very low EMI and excellent ESD protection;
+3.3/5V single power supply;
Low power dissipation;
Operating case temperature: 0 to +70;
Detailed product information in EEPROM;
RoHS compliant.

Applications:
1) LAN 1000Base-T;
2) Switch to Switch interface;
3) Switched backplane applications;
4）Router/Server interface.

In ingellen, the copper SFP transceiver is a type of copper transceiver, our copper SFP products are 100% compatibility with all major brands, such as Cisco, HP, Juniper, Extreme, Dell…, They support 1000 Mbps data rate, for a distance of up to 100 meters reach over unshielded twisted-pair category 5 cable. The module supports1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. The module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address A0h. Ingellen1000Based-T copper SFPis also available for RoHS compliant products and is completely compliant with SONET/SDH recommendations for OC -48 specifications. If you are interested and we are pleased you came to visit our site www.ingellen.com

Posted by: mikofy at 06:41 AM | No Comments | Add Comment
Post contains 421 words, total size 3 kb.