A protocol converter, referred to as protocol translator, accustomed to convert standard or proprietary protocol of one device to the protocol ideal for the other device or tools to offer the interoperability, with every protocol based on many factors. It is much like a language translator, translates messages, or data streams, between networks make it possible for both networks to simply interpret the data. Typical types include E1 to Ethernet, V35 to Ethernet and E1 to V35. Variety protocols utilized in different fields like Power Generation, Transmission & Distribution, Oil & Gas, Automaton, Utilities, AMR, and Remote Monitoring applications.

Structure Of Protocol Converter
The general architecture of the protocol converter includes an internal master protocol communicating towards the external slave devices and the data collected is used to update the internal database of the converter. When the external master requests for data, the internal slave collects data in the database and send it to the external master.

The end result of the protocol converter is to allow the protocol of 1 machine communicate with the protocol of another, increasing the quantity of machines the network can use. As the penalties normally are slight, conversion in one protocol to another may slow the bond speed, especially if the converted protocol innately has a lower data rate. Most converters possess a database with several protocols, and this database is used to transform the initial protocol to a different format.

Different Protocols Of Protocol Converter
The majority of networks have many machines using different protocols, and these protocols dictate the way a machine acts. These protocols are based on several factors, including data rate, encryption methods, file and message formats and associated service, because some services exclusively use one protocol. A protocol converter is given the job of taking this protocol and changing it to a different one.

Most protocol converter units are programmed to understand a number of different protocols, and these units use an internal database to trace all the protocols. This database will store all of the factors associated with the known protocols, and the database is also tasked with helping this device understand what must be changed to change one protocol to another. Unlike regular databases, which may be manually updated, this database typically is locked from users.

Options that come with Protocol Converter
Protocol converters provide physical conversion between ITU-T G.703 standard E1 interface and standard V.35, RS232, RS422 converter, RS485 converter and 10M/100M Ethernet interface, offering security and seamless link for communication between different devices with various interfaces. Protocol supports IEEE 802.3, IEEE 802.1 P, 802.1Q (VLAN). The interface converter transfers data with V.35, RS232, RS485, RS422 output. E1 interface works with ITU-T G.703, G.704 and G.823 supporting BNC 75Ω/unbalance impedance and RJ45 120Ω/balance impedance with speed rates range of 64K~2.048Mbps. Single and multi E1 and framed E1 (FE1) channels; data interface and Ethernet interface; mini rack and 19 inch rack; 220V, 110V, 48V power supply or both are optional, in addition to TDM over IP devices.

Protocol converter series may put into action the actual transformation among single E1 protocol port in addition to protocol ports of V.35, V.24, RS232 Ethernet converter or Ethernet within the tranny system; it may be thoroughly utilized in numerous being able to access issues with regard to providers in addition to commercial clients, for instance DDN, ATM, and for that transformation in between router and E1 port, or perhaps the actual occasion exactly where Ethernet tend to be interconnected from divided internet sites through SDH or even additional tranny gear.

A protocol converter usually is helpful. Protocols are software installed on the routers, they're widely used in a number of industries for applications for example building and process automation. Protocol converters also are employed for substation automation, or a system for managing and controlling equipment within an electrical power system.

Source from Brief Introduction Of Protocol Converter

Posted by: mikofy at 08:06 AM | No Comments | Add Comment
Post contains 652 words, total size 5 kb.