10G fiber optic transceivers are designed for 10G 10Gbit/s data transmission applications including 10 Gigabit Ethernet, 10 Gbit/s Fiber Channel, Synchronous optical networking. After years of 10 gigabit Ethernet's existence, there have been various different form factors and optics types introduced. Nowadays, 10G transceivers series mainly includes 10G Xenpak, 10G X2, 10G XFP and10G SFP+. XENPAK was the first MSA for 10GE and had been the largest form factor. X2 was later competing standards with smaller form factors. XFP came after X2 and it is also smaller. SFP+ offer a much smaller form factor and the ability to offer 1G/10G combo ports on hardware. This is a guide to these module types and optical standards currently available.

10G Xenpak
Xenpak is 10G fiber optic transceiver, it support all optical ports as defined in IEEE 802.3ae, supporting speed 10.3 Gb/s,9.95 Gb/s or4×3.125 Gb/s. XENPAK modules designed XAUI interface and data shaping (CDR) function, which comply with the XENPAK MSA protocol and meet the application of 802.3ae Ethernet protocol 10GB.

The 10G XENPAK optical modules include XENPAK 10GBASE-SR 300 meters (multimode OM3 fiber), XENPAK 10GBASE-LRM multimode fiber 220 meters, XENPAK 10GBASE-LR single-mode fiber 10-20km, XENPAK 10GBASE-ER single-mode fiber 40 km, XENPAK 10GBASE-ZR single-mode fiber 80km.

10G X2
X2 defines a smaller form-factor 10 Gb/s pluggable fiber optic transceiver optimized for 802.3ae Ethernet,ANSI/ITUT OC192/STM- 64 SONET/SDH interfaces,ITUT G.709,OIF OC192 VSR,INCITS/ANSI 10GFC (10 Gigabit Fibre Channel) and other 10 Gigabit applications.X2 is initially focused on optical links to 10 kilometers and is ideally suited for Ethernet,Fibre Channel and telecom switches and standard PCI (peripheral component interconnect) based server and storage connections. X2 is physically smaller than XENPAK but maintains the mature electrical I/O specification defined by the XENPAK MSA and continues to provide robust thermal performance and electromagnetic shielding.

The10gb x2fiber optic transceivers series include X2-10GB-SR, X2-10GB-LR, X2-10GB-ER and X2-10GB-ZR, they are designed based on the X2 MSA and IEEE802.3ae. They are designed for the integrated systems solution provide, fiber optics distributor and other IT distributors.

10G XFP
XFP is a standard for transceivers for high-speed computer network and telecommunication links that use optical fiber. They typically operate at near-infrared wavelengths (colors) of 850 nm, 1310 nm or 1550 nm. Principal applications include 10 Gigabit Ethernet, 10 Gbit/s Fibre Channel, synchronous optical networking (SONET) at OC-192 rates, synchronous optical networking STM-64, 10 Gbit/s Optical Transport Network (OTN) OTU-2, and parallel optics links. They can operate over a single wavelength or use dense wavelength-division multiplexing techniques. They include digital diagnostics that provide management that were added to the SFF-8472 standard. XFP modules use an LC fiber connector type to achieve high density.

The10G XFPfiber optic transceivers series include XFP 10G MM SR, XFP 10GLR OC192SR, XFP 10GER OC192IR and XFP-10GZR-OC192LR.

10G SFP+
10G SFP+ transceivers are multi-purpose optical modules for 10Gbit/s data transmission applications at 850nm, 1310nm and 1550nm. The transceivers are ideally suited for datacom and storage area network (SAN/NAS) applications based on the IEEE 802.3ae and Fibre Channel standards, Fiber Channel 10G, 8.5G, 4.25G, 2.125G, 1.0625G, 10G BASE-SW/SR/LR/ER, 1000Base-SX Ethernet.

The 10G SFP+ fiber optic transceivers series include SFP-10G-SR, SFP-10G-LRM, SFP-10G-LR , SFP-10G-ER, SFP-10G-ZR, SFP-10G-LW, SFP-10G-LH, SFP-10G-LX and SFP-10G-ZW.

Posted by: mikofy at 06:49 AM | No Comments | Add Comment
Post contains 530 words, total size 4 kb.

GBIC Transceiver( gigabit interface converter), one of the many types of transceivers, is a media conversion device between a gigabit Ethernet network and a separate fiber optic based network. Via the GBIC transceiver, Gigabit network equipment can directly connect to copper wires, single mode fiber ports or multimode fiber ports.

Main Features
Generally GBIC fiber optic end the interface is SC type, the laser unit in GBIC module can be 850nm VCSEL, 1310nm FP, 1310nm DFB, and 1550nm DFB. GBIC module can be changed from one type of external interface to another simply by plugging in a GBIC having the alternative external interface. The GBIC transceivers are suitable for interconnections in the Gigabit Ethernet hubs and switches environment. The design of these converters is also practical for other high performance, for example, point-to-point communication applications that involve interconnecting components and
exchanging data between Ethernet and fiber optic networks.

Changing from one type to another is simple because a GBIC transceiver can be removed and installed without turning off the power. Generalized enclosures may be compatible with various transceiver types. It is not complicated to operate, and the digital data transmitter and receiver functions at high speeds. Some models can provide a bi-directional data connection of up to 1.25 gigabits/second, so there is great compatibility with high-speed networks. Compatibility with common power supplies, such as +3.3 and +5.5 volt ratings, extends this compatibility even more.

Other important features of a GBIC transceiver which add to energy efficiency initiatives are that the unit offers low power dissipation and emits little electromagnetic interference. Each device can install and function without disrupting anything, but this plug and play capability can be offset by the need to disconnect patch cords before it is installed or taken out. Power surges and data discrepancies can occur, and it’s always wise to take precautions to avoid this as much as possible, especially in high-density networks.

Industrial Standard
GBIC has its multi sources agreement as the industrial standard, this help manufacturers save cost to develop their each own standard and solve the problem of compatibility. All of the different modules by various manufactures are developed based on industrial standard. This means that they can all be compatible with the same network and with each other to meet data communications requirements. By offering a standard, hot swappable electrical interface, one gigabit port can support a wide range of physical media, from copper to long-wavesingle-mode optical fiber, at lengths of hundreds of kilometers.

GBIC classification is based on its working wavelength, data transmitting rate, working power, and the working distance. The device is characterized by features, such as the wavelengths it can handle, how fast and efficiently it transmits data, the power it needs to operate, and what distance it can transmit data over. These are the main factors to consider when buying a GBIC transceiver to be sure it meets network performance requirements.

Ingellen supplies various kinds of GBIC fiber optic transceivers products, including single mode GBIC, multimode GBIC and copper GBIC with compatibale brands like Cisco, HP and so on. We haveCWDM GBICtransceivers that are with different operation wavelength. EachGBIC Transceiver Moduleis compliant to industrial standard and they are compatible to use with fiber optical equipments from other major companies like Cisco, Juniper, etc.

Posted by: mikofy at 06:34 AM | No Comments | Add Comment
Post contains 550 words, total size 4 kb.

A fiberoptical transceiveris a device used to send and receive optical information. By using an optical transceiver, network spend less space and steer clear of the necessity of getting a transmitter and receiver in the network. Able to transmitting information further and faster than older models, the more recent transceivers are utilized and appearance, creating more compact, smaller sized modules than ever before.

How Do Fiber Optic Transceivers Work
A fiber optic transceiver is a accessory acclimated to forward and accept optical information. There are a number of different components on one of these devices, including a light source and an electrical component. The transceiver has two ends, one that an optical cable plugs into and accession for abutting an electrical device. Fiber optic transceivers combine a fiber optic transmitter and a fiber optic receiver in a single module. They are arranged in parallel so that they can operate independently of each other. Both the receiver and the transmitter have their own circuitry and can handle transmissions in both directions.

In fiber optic data links, the transmitter converts an electrical signal into an optical signal, which is coupled with a connector and transmitted through a fiber optic cable. The light from the end of the cable is coupled to a receiver, where a detector converts the light back into an electrical signal. Either a light emitting diode (LED) or a laser diode is used as the light source.

How to Select Fiber Optic Transceivers
Fiber optic transceivers are designed for use with single mode or multi-mode cable. There are a number of different types of fiber optic transceivers available. They differ in the types of connections as well as in the quality of data transmission. Speed of transmission may also change from device to device. So it is necessary to choose the right fiber modules for your network.

Single-mode fibers (SMF) transmit infrared (IR) laser light at wavelength from 1,300 to 1,550 nm. They have small cores and are used withlaser sources for high speed, long distance links.
Multimode fibers have larger cores and are used mainly with LED sources for lower speed, shorter distance links. The typical transmission speeds and distance limits are 100 Mbit/s for up to 2km, 1Gbit/s to 220-550m, and 10Gbit/s to 300m.
Products that can be used with both types of optical fiber are also available.

Ingellen provides not only the classical 1x9 footprint duplex package but also advanced packages such as SFP (small form-factor pluggable) transceiver module(like1000Base-T copper SFP), GBIC (Gigabit Interface Converter) fiber transceiver, BIDI (single fiber bi-directional) fiber optic transceiver, BIDI-SFP transceiver module, and BIDI-GBIC transceiver, SFP+ transceiver module, XFP optical transceiver, Xenpak optical transceiver, X2 transceiver module. In addition, optical transceivers with Digital Diagnostic Function are also available. Allfiber transceiversare RoHS compliant and could be 100% compatible with branding equipment, such as Cisco, Extreme, Juniper, HP, H3C, Linksys, Huawei, Alcatel-Lucent, Foundry, Nortel, Force10 etc.

Posted by: mikofy at 06:22 AM | No Comments | Add Comment
Post contains 490 words, total size 4 kb.

Xenpaktransceiver, one of the first generation 10G fiber optic transceivers, supports all optical ports as defined in IEEE 802.3ae, supporting speed 10.3 Gb/s,9.95 Gb/s or4×3.125 Gb/s. XENPAK, remain very popular as the install base is large, while the newest SFP+ offer a much smaller form factor and the ability to offer 1G/10G combo ports on hardware for the first time. Also, X2 transceiver is the successor to the XENPAK.

Xenpak transceiver is protocol-specific: Either 10G Ethernet or 10G Fibre Channel versions are available. Xenpak transponders are used in datacom optical links only (not telecom). Its electrical interface to the host board is also standardized and is called XAUI (4 x 3.125 Gb/s). Xenpak transceiver is packed in a 4.8×1.4×0.7 inch package, used DFB laser components, Xenpak working distance via G652 multimode fiber could reach up to 10km, another important components inside the Xenpak is the MUX/DEMUX parts, it consume 50% of the power and result in the bigger size. There arevarious kinds of 10G Xenpak transceivers, typical types include the Xenpak 10GB SR , with 300 meters working span; Xenpak 10GB LR , with 10km working distance; Xenpak 10GB ER, with 40km working distance and the 80km Xenpak 10GB ZR.

Xenpak 10GB SR
XENPAK 10GB SR is a multimode 10GB fiber optic transceiver. It supports a link length of 26m on standard FDDI grade MMF. Up to 300m link lengths are possible when using 2000 MHz/km MMF (OM3).
Xenpak 10GB LR
Xenpak 10GB LR is 10GB single mode fiber optic transceiver. The XENPAK-10GB-LR is a highly integrated serial optical transponder module for high-speed, 10Gbit/s data transmission applications. 4×3.125Gbps Ethernet Signal Input by XAUI Interface.
Xenpak 10GB ER
Xenpak 10GB ER is 40km single mode transceiver for 10G networks. Xenpak 10GB ER transceivers is a 10GB hot swappable transceiver use duplex SC interface, it works with 1550nm single mode fiber for a max 40km working distance.
Xenpak 10GB ZR
The Cisco compliant XENPAK-10GB-ZR is a 10GBASE-ZR XENPAK 1550nm 80km transceiver module. The XENPAK-10GB-ZR transceiver module provides a low cost high-performance connection.

Ingellen is an original manufacturer of XENPAK transceiver, who has many years experiences in offering XENPAK transceiver. Ingellen's XENPAK transceivers are highly integrated, serial optical transponder modules designed for high-speed, 10Gbps data transmission applications. The modules are fully compliant with the IEEE 802.3ae standard making it ideally suited for 10GbE datacom applications. Futher, from Ingellen Corporation you can easily find other 10G modules like 10g sfp transceiver, 10g sfp+ transceiver,10g xenpaktransceiver, 10g xfp transceiver,10gb x2transceiverand so on.

Posted by: mikofy at 06:50 AM | No Comments | Add Comment
Post contains 422 words, total size 3 kb.

XFP Optic Transceiveris the 10Gigabit small form pluggable transceiver, which is protocol independent optical media conversion equipment. XFP modules are designed for single mode fiber and operates at a nominal wavelength of 850/1310/1550 nm. They can operate over a single wavelength or use dense wavelength-division multiplexing techniques. They are widely used in 10 Gigabit Ethernet, 10 Gbit/s Fibre Channel, synchronous optical networking (SONET) at OC-192 rates, synchronous optical networking STM-64, 10 Gbit/s Optical Transport Network (OTN) OTU-2, and parallel optics links. Nowadays, XFP is the most compact size and low cost 10G transceivers.

10g XFP feature its most compact size and most economic prices compared with its former 10g transceivers and this help it took a lot of the market. 10 Gigabit Ethernet port on the switches and routers are usually independent and can be installed with pluggable fiber optic transceiver modules, which make it more convenient for end users.

10g XFP is the small form factor pluggable transceiver designed for the 10 gigabit network applications. When IEEE 802.3ae was made in 2002, Ethernet standards had expanded to the 10ge, the 10g Ethernet increased the data rate by 10 times than gigabit Ethernet and the working distance also enlarged a lot compared with before. 10g XFP is designed based on these standards, and will also support OC192/STM-64 and 10G Fibre Channel. Typical 10g XFP in the market include SR, LR, ER, ZR versions.

XFP 10G MM SR
XFP SR is 10Gbps fiber optic transceiver working at 850nm wavelength, XFP SR typical working distance is 300 meters; XFP SR is suitable for use in 10G datacom (belly-to-belly for high density applications) and storage area network (SAN/NAS) applications based on IEEE 802.3ae and Fiber Channel standards.
XFP 10GLR OC192SR
XFP LR is hot swappable fiber optic transceiver used for 10G networks like 10 Gigabit Ethernet, SDH, SONET, XFP LR support data transfer rate from 9.95Gbps to 11.1Gbps, max working distance of the XFP LR fiber transceiver is 10km.
XFP 10GER OC192IR
XFP ER adopts cooled EML laser diode and PIN photodiode, XFP ER is 10G fiber optic transceiver which is fully compatible with XFP MSA and IEEE 802.3ae-2002, max working span of the XFP ER is 40km.
XFP-10GZR-OC192LR
XFP ZR is 10Gbps fiber optic transceiver which is compatible with IEEE 802.3ae and Fiber Channel standards, XFP ZR use single mode optical fiber and its max working span could reach 80km, XFP ZR use 1550nm working wavelength, this fiber optic transceiver use dual LC fiber interface and the other end of the module could fit into relevant XFP slots or ports.

Ingellen offers the whole series of10G XFPfiber optic transceivers, including: XFP 10GBASE-SR 300M (MMF OM3); XFP 10GBASE-LRM MMF 220M; XFP 10GBASE-LR SMF 10-20KM; XFP 10GBASE-ER SMF 40KM; XFP 10GBASE-ZR SMF 80KM; 18 Channels CWDM XFP; 40 Channels DWDM XFP; BIDI XFP; etc.10Gbps XFP Moduleis made according to the multi source agreement (MSA). Ingellen also manufacture original XFP MM 300m, XFP 10km, XFP 20km, XFP 40km, XFP 80km, XFP 120km, CWDM XFP, DWDM XFP, WDM XFP, BiDi XFP, single fiber XFP and series of compatible XFP transceivers such as Cisco XFP, 3Com XFP, Juniper XFP, Foundry XFP, Extreme XFP, Dell XFP, Finisar XFP and more.

Posted by: mikofy at 06:37 AM | No Comments | Add Comment
Post contains 536 words, total size 4 kb.

SFP (small form-factor pluggable) is a popular industry format jointly developed and supported by many network component vendors.SFP transceiveris designed to support SONET, Gigabit Ethernet, Fibre Channel, and other communications standards.

Main Features:
Industry standard small form pluggable (SFP) package;
Immovable lock Design;
Hot Pluggable;
Duplex LC connector;
Full duplex speeds support;
TTL signal detect indicator;
3.3 VDC power supply;
Industry leading EMI performance for high port density;
Class 1 laser product complies with EN 60825-1;
RoHS compliant.

The Types
SFP Transceivers have a wide range of detachable interfaces to multimode/single-mode fiber optics, which allows users to select the appropriate transceiver according to the required optical range for the network. SFP has transmission rate ranging from 100Mbps to 4Gbps and it can work at distances ranging between 500 meters to hundreds of kilometers. Optical SFP modules are commonly available in several different categories, including single mode SFP, multimode SFP and copper SFP, which are with various working wavelength and functions. Each type comes with different configurations of transmitter and receiver.

Multi-mode fiber
SX - 850 nm, for a maximum of 550 m at 1.25 Gbit/s (Gigabit Ethernet) or 150m at 4.25 Gbit/s (Fibre Channel).
Single-mode fiber
LX - 1310 nm, for distances up to 10 km;
BX - 1490 nm/1310 nm, Single Fiber Bi-Directional Gigabit SFP Transceivers, paired as BS-U and BS-D for Uplink and Downlink respectively, also for distances up to 10 km. Variations of bidirectional SFPs are also manufactured which use 1550 nm in one direction;
1550 nm 40 km (XD), 80 km (ZX), 120 km (EX or EZX);
CWDM andDWDM SFPtransceivers at various wavelengths achieving various maximum distances.
Copper fiber
1000BASE-T - these modules incorporate significant interface circuitry and can only be used for Gigabit Ethernet, as that is the interface they implement. They are not compatible with (or rather:do not have equivalents for) Fibre channel or SONET.

Suitable Applications:
Switches/bridges/routers/servers;
SONET/SDH Network;
Gigabit Ethernet;
1x/2x Fiber Channel;
Point-to-point networking;
Metro Access Rings;
Fiber-to-the-desktop (FTTD);
High-speed computer links;
LAN, SAN (local, storage area networks).

The Advantages
SFP, also called a mini GigaBit Interface Converter (GBIC), is an upgraded version of GBIC module. Since SFP is only half the size of the GBIC, making it saved more space. Any future changes can be easily incorporated into the SFP module, it is easier to change and easier for maintenance compared with traditional modules. Users can replace a single SFP module during the process instead of replace the whole board with many modules on it.

SFP optic transceiver is also available with copper cable interfaces, which allows a host device designed primarily for optical fiber communications to communicate over shielded or unshielded twisted pair networking cables. Usually such copper cable interfaces are used when the information to be transmitted needs to cover only shorter distances where use of copper cable is more economical than optic fiber cables.

Modern optical SFP transceivers support digital diagnostics monitoring (DDM) functions, also known as digital optical monitoring (DOM). This feature gives users the ability to monitor the real-time parameters of SFP, such as optical output power, optical input power, temperature, laser-bias current and transceiver supply voltage. SFP transceivers are housed in a metal enclosure and their power dissipation is low. They operate over a wide temperature range and support a large number of different types of cable. An improved version of SFPoptical transceiverstandard called SFP+ can support transmissionrates up to 10Gbps.

Posted by: mikofy at 06:42 AM | No Comments | Add Comment
Post contains 576 words, total size 5 kb.

GLC-TCopper Small Form Pluggable (SFP)transceivers offer a convenient and cost effective solution for the adoption of Gigabit Ethernet and Fibre Channel in data center, campus, metropolitan area access and ring networks, and storage area networks.

It is compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE 802.3-2002 and IEEE 802.3ab, which supports 1000Mbps data- rate up to 100 meters reach over Category 5 copper line. The Cisco SFP provides full-duplex Gigabit Ethernet connectivity to high-end workstations and between wiring closets over existing copper network infrastructure. Cisco GLC-T SFP transceiver is a hot pluggable module which with RJ45 interface, it is compatible to use with 1000Base-T application.

Cisco GLC-Toptical module features:
Up to 1.25Gb/s bi-directional data links;
Hot-pluggable SFP footprint;
Extended case temperature range (0°C to +70°C );
Fully metallic enclosure for low EMI;
Low power dissipation (1.05 W typical);
Compact RJ-45 connector assembly;
Access to physical layer IC via 2-wire serial bus;
1000 BASE-T operation in host systems with SERDES interface;
10/100/1000Mbps compliant in host systems with SGMII interface.

The GLC-T SFP transceiver supports1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All 4 pairs on the cable being used with symbol rate at 250Mbps on each pair. The GLC-T SFP transceiver provides standard serial ID information compliant with SFP MSA, and this can be accessed with address of A0h by its 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address A0h.

Ingellen original GLC-T SFP products are fully compatible with Cisco routers and switches. Each GLC-T transceiver is programmed with a unique serial number and a Cisco compatible CRYPTO code. In addition, GLC-T supplied by Ingellen is automatically rate adaptable to operation at 10, 100, or 1000Mbps speeds over up to 100 meters of unshielded twisted-pair category 5 cable. Like other fiber optic products supplied by Ingellen, the GLC-T is backed by a 3-year non- prorated warranty, free email/phone technical support and advanced replacement (with RMA) and guaranteed emergency spares.

Posted by: mikofy at 06:41 AM | No Comments | Add Comment
Post contains 341 words, total size 3 kb.

SFP+ is the enhanced version of the SFP (small form-factor pluggable), which supports data rates of up to 10Gbit/s Fiber Channel and Ethernet applications. It leaves more circuitry to be implemented on the host board instead of inside the module compared with the earlier XENPAK or XFP modules. Nowadays, 10 Gigabit Ethernet is becoming the interconnect of choice in data centers of all sizes providing key improvements in terms of bandwidth, latency, scalability, reliability and application performance.

10G SFP+ moduleis multi-purpose optical transceiver for 10Gbit/s data transmission applications at 850nm, 1310nm and 1550nm. The transceivers are ideally suited for datacom and storage area network (SAN/NAS) applications based on the IEEE 802.3ae and Fibre Channel standards, Fiber Channel 10G, 8.5G, 4.25G, 2.125G, 1.0625G, 10G BASE-SW/SR/LR/ER, 1000Base-SX Ethernet.

Key Features of 10G SFP+:
Compliant to SFP+ Electrical MSA SFF-8431;
Compliant to SFP+ Mechanical MSA SFF-8432;
Multi rate of up to 11.3Gb/s;
10G Ethernet compliance;
2G/4G/8G Fibre Channel compliance;
Transmission distance up to 10km (SM fiber);
Low power consumption: 0.85W (Typ.);
0C to +70C case operating temperature range;
Laser Class 1 IEC / CDRH compliant;
RoHS 6/6 compliant;
Compliant with product safety standards.

Ingellen offers full line of 10G SFP+ fiber optic transceivers, including: SFP+ MM 300m, SFP+ 10km, SFP+ 40km, CWDM SFP+, DWDM SFP+, BiDi SFP+, and series of Compatible Brands such as Cisco compatible, Juniper Compatible, HP compatible SFP plus transceivers. In the following is the Cisco 10G SFP+ modules among the hottest ones.

Cisco SFP-10G-SR
TheCisco SFP-10G-SRmodule supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade multimode fiber (MMF). Using 2000MHz*km MMF (OM3), up to 300m link lengths are possible. Using 4700MHz*km MMF (OM4), up to 400m link lengths are possible.

Cisco SFP-10G-SR-X
The Cisco SFP-10G-SR-X is a 10GBASE-SR module for extended operating temperature range. It supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade multimode fiber (MMF). Using 2000MHz*km MMF (OM3), up to 300m link lengths are possible. Using 4700MHz*km MMF (OM4), up to 400m link lengths are possible.

Cisco SFP-10G-LRM
The Cisco 10GBASE-LRM Module supports link lengths of 220m on standard Fiber Distributed Data Interface (FDDI) grade multimode fiber (MMF). To ensure that specifications are met over FDDI-grade, OM1 and OM2 fibers, the transmitter should be coupled through a mode conditioning patch cord.

Cisco SFP-10G-LR
The Cisco 10GBASE-LR Module supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652).

Cisco SFP-10G-LR-X
The Cisco SFP-10G-LR-X is a multirate 10GBASE-LR, 10GBASE-LW and OTU2/OTU2e module for extended operating temperature range. It supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652).

Cisco SFP-10G-ER
The Cisco 10GBASE-ER Module supports a link length of up to 40 kilometers on standard single-mode fiber (SMF, G.652).

Cisco SFP-10G-ZR
The Cisco SFP-10G-ZR is a multirate 10GBASE-ZR, 10GBASE-ZW and OTU2/OTU2e module. It supports link lengths of up to about 80 kilometers on standard single-mode fiber (SMF, G.652). This interface is not specified as part of the 10 Gigabit Ethernet standard and is instead built according to Cisco specifications.

As an experienced fiber optic manufacturer, Ingellen is capable to customize the completely Cisco compatible 10G SFP+ transceiver according to our customers' requests. Or you can choose Ingellen original 10G SFP+ transceivers as you like, which is also ideal for your networking.

Posted by: mikofy at 06:36 AM | No Comments | Add Comment
Post contains 555 words, total size 4 kb.

SFP(Small Form-Factor Pluggable Interface Converter) optic modules, are small form factor pluggable module for multi-mode fiber Fast Ethernet, plug into a variety of SFP-based POS, TDM and ATM interfaces on router products. This line of SFP optics supports the following three data rates at various reaches:OC-3/STM-1SFP (155 Mbps), OC-12/STM-4 SFP (622 Mbps), and OC-48/STM-16 SFP (2,488 Gbps).

Large economies of scale can be achieved by substituting multiple single T1/E1 trunks with a single fiber connection running at 155 Mbps, which OC-3/STM-1 does. OC-3 STM-1 is a network line with transmission speeds of up to 155.52 Mbit/s (payload: 148.608 Mbit/s; overhead: 6.912 Mbit/s, including path overhead) using fiber optics. Depending on the system OC-3 is also known as STS-3 (electrical level) and STM-1 (SDH). OC-3/STM-1 is a commonly used universal interface in the telecom community. A STM-1 or OC-3 interface will reduce overall expenses and control costs by combining data and voice applications over one circuit. These modules are also used for Fast Ethernet application. Depending on the market, the benefits can be seen as soon as you subscribe to more than 20 T1 or E1 circuits simultaneously. Ingellen offers full line of SDH OC3 SFP fiber optic transceivers which support DDM/DOM, BIDI and CWDM/DWDM. The products include:

SFP-OC3-MM=
OC-3/STM-1 pluggable short-reach (2 km) transceiver module, 1310-nm wavelength, MMF, LC connector

SFP-OC3-SR=
OC-3/STM-1 pluggable short-reach (2 km) transceiver module, 1310-nm wavelength, LC connector

SFP-OC3-IR1=
OC-3/STM-1 pluggable intermediate-reach (15 km) transceiver module, 1310-nm wavelength, LC connector

SFP-OC3-LR1=
OC-3/STM-1 pluggable long-reach (40 km) transceiver module, 1310-nm wavelength, LC connector

SFP-OC3-LR2=
OC-3/STM-1 pluggable long-reach (80 km) transceiver module, 1550-nm wavelength, LC connector

The OC-3/STM-1 Module is a highly versatile access solution, suitable for various applications, including: DSLAM backhaul, POS router interconnect, Voice exchange interconnect, Interconnect of ATM switches, SDH/SONET network bridging and Distributed cross-connect.

Ingellen is a leading fiber optic manufacturer who has rich experience in fiber optical field. Ingellen's original OC-3/STM-1 SFP transceivers are designed for Fast Ethernet & SDH STM-1&SONET OC-3, which can be used in fast ethernet switch, router and other networking equipments from Cisco and other brands like HP, Juniper and so on. The SFPs are compatible with the SONET/SDH and ATM standards, and support the digital diagnostic functions specified in the SFF-8742 Multi-Source Agreement (MSA) and the extended operating temperature range from 23 to185°F (-5 to 85°C). The OC-3/STM-1 SFP transceivers module is a high performance and cost effective fiber optic transceiver. More, you can easily find other SFP modules likeOC-12 SFPandOC-48 SFPthere. All of them can be provided with a very good price and reliable quality.

Posted by: mikofy at 07:58 AM | No Comments | Add Comment
Post contains 433 words, total size 4 kb.

Ingellen Technology supplies all kinds of optical transceivers and compatible brands like Cisco. And Cisco X2 modules are supported on Cisco switches and routers.

Main features of Cisco 10GBASE X2 modules include:
Support 10GBASE Ethernet;
Hot-swappable input/output device plugs into an Ethernet X2 port of a Cisco switch or router to link the port with the network;
Provides flexibility of interface choice;
Supports "pay-as-you-populate" model;
Supports the Cisco quality identification (ID) feature that enables a Cisco switch or router to identify whether the module is certified and tested by Cisco;
Has optical interoperability with respective 10GBASE Xenpak, 10GBASE XFP and 10GBASE SFP+ modules on the same link.

Cisco X2-10GB-SR
TheX2-10GB-SRis a Class 1 laser product, which is designed for 300m Transmission with a vertical cavity surface emitting laser (VCSEL). X2-10GB-SR, replacement for Cisco 10GBase-SR SC 300M, is a hot pluggable in the Z-direction module that is usable in typical router line card applications, Storage, IP network and LAN and compliant to X2 MSA. It fully complies with the multi-sourcing agreement (MSA) which enables it to work in all MSA compliant platforms. 10GBase-SR is the original multimode optics specification, and is still by far the most commonly used. As it uses a single, low cost solid state laser assembly, it is also the least expensive of the optical modules available for a 10GbE platform.

The Cisco 10GBASE-SR Module supports a link length of 26m on standard FDDI grade MMF. Using 2000 MHz*km MMF (OM3), up to 300m link lengths are possible. Using 4700 MHz*km MMF (OM4), up to 400m link lengths are possible. X2-10GB-SR is high performance, cost effective module supporting 300M transmission distance, also, the X2-10GB-SR is a fully integrated 10.3Gbit/s optical transceiver module that consists of a 10.3Gbit/s optical transmitter and receiver, XAUI interface, Mux and Demux with clock and data recovery(CDR). This X2-10GB-SR version of X2 transceiver line uses an 850nm Vcsel Laser Diode to achieve 300m over 50/125 multi-mode fiber as 10GBASE-SR of the IEEE 802.3ae.

Digital diagnostics functions of this X2 10gb transceivers are available via a 2-wire serial interface. Cisco X2 10GB SR transceiver is a multimode products used for 10G networks, it works with 850nm via multimode fiber. The Cisco X2 10GB SR Cisco module is a multimode transceiver target at the 10G applications. It works with 850nm multimode fiber and the optical interface is duplex SC. X2 10GB SR can link the equipment to fiber optic networks, max transmission distance is 300meters.

X2 10GB SR Features:
Compatible with X2 MSA Rev2.0b;
Support of IEEE 802.3ae 10GBASE-SR at 10.3125Gbps;
Transmission Distance up to 300m (MMF);
Vertical Cavity Surface Emitting Laser at 850nm;
SC Duplex Optical Connector;
Hot Pluggable 70-PIN Connector with XAUI Electrical Interface;
Management and control via MDIO 2-wire interface;
Power Supply :+3.3V, APS(+1.2V);
Diagnostic Optics Monitoring;
Temperature Range: 0~ 70 °C;
ROHS Compatible.

Note: For optical X2 modules, only connections with patch cords with PC or UPC connectors are supported. Patch cords with APC connectors are not supported. All cables and cable assemblies used must be compliant with the standards specified in the standards section. The X2-10GB-SR must be operatred within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug.

X2 10GB SR transceivers offered by Ingellen are tested with equipment from Cisco and other companies to make sure of its compatibility, whose products are not second hand but brand new compatible transceivers. These X2 10GB SR modules are competitive price, reliable quality and prompt delivery. You also can find other Cisco products likeCisco SFPtransceivers, Cisco GBIC transceivers, Cisco SFP+ modules and so on.

Posted by: mikofy at 06:49 AM | No Comments | Add Comment
Post contains 617 words, total size 5 kb.

Optical transceiver modules are known to be sectioned by transmission speed rates standard in the industry. 1Gbps to 10Gbps are rates that each optical module supports. You choose the rightoptical transceiversuitable for you based on the rates that modules support. There are a number of various transceiver modules that function differently, at different speeds and ranges and with different features.There are XENPAK pluggables, XFP modules, X2 modules, GBIC modules, SFP modules, SFP+ modules, SFP-BIDI transceivers and so on. SFP optical transceiver modules combine transmit and receive functions in a compact, low-power, low-cost package format. Rapidly accepted as the industry standard, SFP modules now are widely used to support Fibre Channel, Gigabit Ethernet (GbE), and SONET/SDH applications. More, the maturation of copper SFP transceivers is playing an important roll in enabling system designers to meet these objectives while simplifying their inventory and reducing operating costs. Modules like copper SFP have special working functions such as it conform to the SFP form factor have emerged as the best way to optimize port-level flexibility. But how much do you know the copper modules?

Copper SFP transceiver is the small form pluggable transceiver modules which use a copper line for linking, which includes transmit and receive two decision points. Radiating portion consists of laser circuit and optical maser, Receiving part consists of PIN, TIA and Limtiting Amp. Completion of the digital signal transparent O / E, the E / O conversion functions. Copper transceiver can divided into copper SFP modules and copper GBIC modules.

Copper SFP
Copper SFP moduleis the small form pluggable transceiver modules which use a copper line for linking. Typical copper SFP products like Cisco GLC T and SFP GE T, these SFP modules are used in Gigabit networks and they are fully compatible with 1000Base-T. SFP GE T is the copper SFP that are with extended working temperature and DOM support. Ingellen copper transceiver is high performance, cost effective module compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE 82. 3-22 and IEEE 82.3ab, which supporting 1Mbps data- rate up to 1 meters reach over unshielded twisted-pair CAT 5 cable.

Copper GBIC
Copper GBIC refer to the GBIC that use with copper line for linking. Typical copper GBIC like Cisco WS-G5483, the copper GBIC function according to 1000Base-T standard for Gigabit Ethernet, copper GBIC use Category 5 cables to provide 1000Base-T full duplex connectivity between the transceiver and the network to 100 meters span max. Ingellen offers a range of copper GBIC transceivers which can be 100% compatible with the original brands.

Many copper SFPs products supplier like Cisco offer "tri-rate” capability or backwards compatibility with 100/10BASE-T in addition to 1000BASE-T operation through an SGMII interface. Ingellen also provides Cisco copper transceives with high performance and competitive price. Feel pleased to visit our official website www.ingellen.com to learn further information of the fiber optic transceivers.

Posted by: mikofy at 07:11 AM | No Comments | Add Comment
Post contains 488 words, total size 4 kb.

Copper transceiver is high performance, cost effective module compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 82. 3-22 and IEEE 82.3ab, which supporting 1Mbps data- rate up to 1 meters reach over unshielded twisted-pair CAT 5 cable. Copper SFPs enable system manufacturers to populate SFP ports with either copper or optical transceivers.1000Base-T copper SFPis used for copper networks, which refers to GbE over copper, primarily Category 5, 5E, and, increasingly, Category 6 twisted-pair cable. Typical 1000Base T SFP includes Cisco GLC T and SFP GET,these SFP modules are used in Gigabit networks and they are fully compatible with 1000Base-T. SFP GE T is the copper SFP that are with extended working temperature and DOM support.

1000Base-T copper SFP transceiver
1000Base-T SFP copper transceiver is designed for single mode (SM) optical fiber. This transceiver is compliant with Gigabit Ethernet and 1000BASE-T standards as specified in IEEE802.3-2002 and IEEE 802.3ab for 1.25 Gigabit over unshielded twisted-pair category-5 cable. It operates on standard Category 5 unshielded twisted pair copper cabling of up to 100m length. This transceiver is also compliant with RoHS, SFP MSA, FCC 47 SFR Part 15, Class B and SONET/SDH recommendations for OC-48 specifications. It is widely used in serial telecom and datacom applications.

Specification of 1000Base-T SFP:
Up to 1.25Gb/s bi-directional data links;
Hot-pluggable SFP footprint;
Extended case temperature range (0°C to +85°C );
Fully metallic enclosure for low EMI;
Low power dissipation (1.05 W typical);
Compact RJ-45 connector assembly;
RoHS compliant and Lead Free;
Access to physical layer IC via 2-wire serial bus;
10/100/1000 BASE-T operation in host systems with SGMII interface;
SFP MSA compliant;
1000BASE-X enabled by default;
Link indication feature disabled;
1.25 Gigabit Ethernet over Cat 5 cable.

Application:
LAN 1000Base-T;
Gigabit Ethernet over Cat 5 Cable;
Switch to Switch Interface;
Router/Server Interface.

The 1000Base-T SFP copper module is compliant with Gigabit Ethernet and 1000BASE-T standards as specified in IEEE802.3-2002 and IEEE 802.3ab for 1.25 Gigabit over unshielded twisted-pair category-5 cable. It ofers 1000Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. This transceiver is also compliant with RoHS, SFP MSA, FCC 47 SFR Part 15, Class B and SONET/SDH recommendations for OC-48 specifications. It is widely used in serial telecom and datacom applications. Cisco 1000BASE-T SFP modules support 10/100/1000 auto negotiation and Auto MDI/MDIX. Ingellen is a professionalfiber optic manufacturerwho aims at making your optical network simple. Ingellen offers 1000Base -T copper SFP and 10/100/1000Base-T copper transceivers with stable quality and competitive price. These modules can be installed into optical SFP slots enabling an optical Ethernet port (1000Base-X) to be converted into a copper Ethernet port (1000Base-T) either in the field or in production. You can find original 1000Base-T SFP transceiver or Cisco GLC T(1000Base-T SFP module) at Ingellen, which are ideal for your optical networking.

Posted by: mikofy at 07:05 AM | No Comments | Add Comment
Post contains 473 words, total size 4 kb.

HP transceiver modules are hot-swappable devices, which combine the capabilities of a transmitter and receiver into a single module. The hot-swappable element allows you to change between transceiver modules, without turning off the power to your device. For example, you can change to a HP transceiver module with a different optical wavelength, or from one which supports copper wire to support for optical fiber if required. As you know, HP transceiver modules are available which support data rates from 100Base (100 Mbit/s), up to the 10G Base (10 Gbit/s), including HP SFPs, HP SFP+s, HP GBICs, HP XENPAKs, HP XFPs, and HP X2s. Next is the information of top seller HPJ8436Atransceiver, which is one kinds of HP X2 modules.

HP J8436A X2 Descriptions
The HP J8436A is a 10GBASE-SR X2 850nm 300m transceiver module, which combines quality with low cost and gives you an ideal alternative except for the high price transceivers. The HP J8436A is 100% compatible with all HP series switches and modules which support X2 transceivers. An X2 form-factor transceiver that supports the 10-Gigabit SR standard, providing 10-Gigabit connectivity up to 300 meters on multimode fiber.

Key Features:
Transmission distance up to 300m over MMF;
850nm VCSEL Laser;
Laser Class 1 compliant;
Duplex SC connector;
RoHS Compliant;
Hot pluggable 70-pin connector with XAUI electrical interface;
Management and control via MDIO 2-wire interface;
Support of IEEE 802.3ae, 10GBASE-SR application;
Compatible with X2 MSA Rev.2.0b;
Low Power Consumption 2.0 W (typ.);
Operating Case Temperature Standard:0℃~+70℃.

Ingellen Technology is one of the leading optical transceiver supplier, which offers to worldwide customers with low cost and high quality compatible HP transceivers, it is the one-stop source for optical fiber transceivers right here,no need to look around. You also can find other HP modules there, such as HPJ4858C1000BASE-SX SFP transceiver, which supports dual data-rate of 1.25Gbps/1.0625Gbps and 500m transmission distance on MMF. There also other HP 1000Base SFP transceivers like J4858A, J4859A, J4860A, J4858B, J4859B, J4860B, J8177C,J4859Cand J4860C.

HP SFP J4858B, J4858C Features:
Form Factor: Plug-in module
Device Type: Transceiver module
Product Type: SFP
Data Rate: 1.25Gbps
Wavelength: 850nm
Datarange: 550m
Connector Type: LC Duplex
Cable Type: Multi-Mode Fiber (MMF)
DDM: Without DDM
Operating Temperature: 0~70 °C
Compliant with MSA SFP Specification

You also can easily find HP 1000BASE-SX SFP, 1000BASE-LX SFP, 1000BASE-ZX SFP and 1000BASE-T SFP transceivers at Ingellen, as Ingellen provides a fully range of HP transceiver modules. HP Transceiver modules are available for different types of cabling such as cat 5 copper, and different grades of optical fibers so please ensure that you are purchasing the correct type of transceiver for network. You can connect our sales@ingellen.com for further information. Enjoy your shopping there!

Posted by: mikofy at 06:56 AM | No Comments | Add Comment
Post contains 451 words, total size 4 kb.

Via the GBIC (Gigabit Interface Converter)transceiver, Gigabit network equipment can directly connect to copper wires, single mode fiber ports or multimode fiber ports. The industry-standardCisco GBICtransceiver is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. There are a range of Cisco GBIC modules, including Cisco 1000BASE-T GBIC, Cisco 1000BASE-SX GBIC, Cisco 1000BASE-LX/LH GBIC and Cisco 1000BASE-ZX GBIC, which have different features and used in different applications. To understand them deeply, in the
following I will talk about the detailed information of them.

Cisco 1000BASE-T GBIC(Copper)
The Cisco 1000BASE-T GBIC (product number WS-G5483) connects a GBIC port to Category 5 wiring using a standard RJ-45 interface.

WS-G5483 is a copper connectivity GBIC transceiver which could use Category 5 cables to provide 1000Base-T full-duplex connectivity between the Gigabit Ethernet module or supervisor engine and the network. The distance of the category 5 is at around 100 meters max.

Cisco 1000BASE-SX GBIC(Short wavelength)
The Cisco 1000BASE-SX GBIC (product number WS-G5484) operates on legacy multimode fiber (MMF) optic link spans up to 1815 feet (550 m) and on laser-optimized multimode fiber (OM3) optic link spans up to 3281 feet (1 km).

WS-G5484 operates on common used multimode fiber optic link to the distance around 550 meters. WS-G5484 working wavelength at 850nm, its dimensions is about 1.2 in x 2.6 in x 0.4 in. This hot swappable GBIC WS-G5484 is with data transfer rate 1Gbps and work according to IEEE 802.3z standards.

Cisco 1000BASE-LX/LH GBIC(Long wavelength)
The Cisco 1000BASE-LX/LH GBIC (product number WS-G5486) fully complies with the IEEE 802.3z 1000BASE-LX10 standard. It allows for reaches up to 6.2 miles (10 km) over single-mode fiber (SMF) and up to 550 meters over multimode fiber (MMF).

WS-G5486 operates over single mode optical fiber and the working distance could reach around 10 km, and it could reach up to 550 m on any multimode fibers as well. The WS-G5486 is fully compatible with IEEE 802.3z 1000Base LX standard.

Cisco 1000BASE-ZX GBIC(Extended distance)
The Cisco 1000BASE-ZX GBIC (product number WS-G5487) operates on ordinary single-mode fiber optic link spans up to 43.4 miles (70 km) long. Link spans of up to 62 miles (100 km) are possible using premium single-mode fiber or dispersion shifted single-mode fiber. The GBIC provides an optical link budget of 21 dB - the precise link span length will depend on multiple factors such as fiber quality, number of splices, and connectors.

WS-G5487is a 1000BASE-ZX GBIC 1550nm 80km transceiver module,WS G5487 is a single mode GBIC fiber transceiver whose working distance could reach up to more than 70km, its working wavelength is 1550nm. WS-G5487 is designed to use with single mode fiber for long distance data transmission and it does not fit to use multimode optical fiber.

These small, modular optical interface modules offer a convenient and cost effective solution for the adoption of Gigabit Ethernet and Fibre Channel in data center, campus, metropolitan area access and ring networks, and storage area networks. Cisco GBICs can be interchanged on a wide variety of Cisco products and can be intermixed in combinations of 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH,1000BASE-ZX, 1000BASE-CWDM, or 1000BASE-DWDM interfaces on a port-by-port basis.

Posted by: mikofy at 06:42 AM | No Comments | Add Comment
Post contains 533 words, total size 4 kb.

GBIC module, short name for the Gigabit Interface Converter, is a media conversion device between Gigabit Ethernet and fiber optic networks. Thus GBIC modules function is to transform the signals between electric signals and optical fiber signals. GBIC transceiver is hot pluggable, allows a suitably designed enclosure to be changed from one type of external interface to another simply by plugging in a GBIC having the alternative external interface.

GBIC classification is based on its working wavelength, data transmitting rate, working power, and working distance. Generally GBIC fiber optic end the interface is SC type, the laser unit in GBIC module can be 850nm VCSEL, 1310nm FP, 1310nm DFB, and 1550nm DFB. Ingellen provides GBIC transceiver modules, including WS-G5483,WS-G5484,WS-G5486,WS-G5487 and CWDM GBIC. These modules are with 850nm, 1310nm, 1550nm wavelength, 1.25Gbps, 1.0625Gbps data rate, working distance from 300 meters to 80 kilo meters. But how much do you know about CWDM GBIC module?

CWDM GBIC module
The CWDM GBIC module, works at 1.25Gbps full duplex mode, help companies and service providers to set up scalable and easy to deploy Gigabit Ethernet and Fiber Channel service in the networks. The CWDM GBIC modules are plug and play and very simple to use, which do not require configuration. The CWDM GBIC are used in fiber optic network according to IEEE 802.3z standard, it could be plugged into the GBIC ports or slots of router or switch for linking.

There are a wide range of CWDM GBIC available, including CWDM GBIC 1470, CWDM GBIC 1490, CWDM GBIC 1510, CWDM GBIC 1530, CWDM GBIC 1550, CWDM GBIC 1570, CWDM GBIC 1590, CWDM GBIC 1610, these products operate at different working wavelength. Follow is their typical specifications.

CWDM GBIC transceivers Features:
Dual data-rate of 1.25Gbps/1.0625Gbps operation;
18 CWDM DFB wavelengths laser and PIN photodetector for 80km transmission;
Duplex SC optical interface;
Standard serial ID information compatible with SFF-8053;
+3.3V/5Vsingle power supply;
RoHS Compliant;
Operating case temperature: 0 to +70℃.

Cisco GBIC fiber transceiver is an international acknowledged standard as described by SFF Committee in document SFF-8053. They are a series of pluggable Gigabit rate transceivers that can be used on the GBIC ports on the equipment to link with the fiber optic networks. Common Cisco GBIC fiber optic transceivers use dual SC optical fiber interface, which can fit to the GBIC slot on the switches or routers. Cisco CWDM GBIC transceivers work with wavelength from 1470nm to 1610nm, each bear different colors to identify them easily. All theCWDM GBICtransceivers are compatible with IEEE 1000Base-X standards and hot pluggable, easy for deployment and maintenance in Gigabit Networks.

Note:
When install the GBIC modules, please note at the alignment groove at the side of the transceiver, and make sure it fit for the Ethernet interface slot(sometimes you may need to turn it 180 degree to fit for the interface) and try the insertion. More, before you install or remove it, please disconnect all the fiber optic patch cords connected to it.

Posted by: mikofy at 06:42 AM | No Comments | Add Comment
Post contains 499 words, total size 4 kb.

SFP(small form-factor pluggable) fiber optic transceiver is the standard components supported by many industrial companies, which is used in telecom and data communications to link the equipment like switches, routers. In the below I would like to introduce you4G SFP transceiverSeries, which are Fiber Channel SFP modules. But first, I should explain what exactly the Fiber Channel is.

Fiber Channel or FC, is a high-performance connection standard designed for bi-direction, serial data communication between servers, storage networking and point to point connections. Some common Fibre Channel applications include LAN-Free Backup, Clustering, Storage Consolidation and Storage Virtualization. As the storage requirements and information needs of companies continue to expand, these applications are becoming increasingly common and of higher importance. Fibre Channel is standardized in the T11 Technical Committee of the InterNational Committee for Information Technology Standards (INCITS), an American National Standards Institute (ANSI)-accredited standards committee. It started use primarily in the supercomputer field,but has become the standard connection type for storage area networks (SAN) in enterprise storage.Despite its name,Fibre Channel signaling can run on both twisted pair copper wire and fiber-optic cables.

4G SFP Series
Ingellen 4G SFP transceivers are designed for the applications of the storage network, server, computing center of 4x Fiber Channel, or FC. These modules meet the requirements of the IEEE 802.3 Gigabit Ethernet standard and ANSI Fibre Channel specifications, and are suitable for interconnections in Gigabit Ethernet and Fiber Channel environments. Ingellen offers the whole series of 4G SFP transceivers, including INSP-4G-FC-SW, INSP-4G-FC-MX, INSP-4G-FC-LW, INSP-4G-FC-LX, INSP-4G-FC-LH and INSP-4G-FC-ZW.

INSP-4G-FC-SW (SFP Duplex LC 4G 850nm 300m)
The INSP-4G-FC-SW transceiver is small form factor pluggable module for duplex optical data communications such as 4X/2X/1X Fiber Channel and Gigabit Ethernet 1000BASE-SX.

INSP-4G-FC-MX (SFP Duplex LC 4G 1310nm 5km)
The INSP-4G-FC-MX is small form factor pluggable module for duplex optical data communications such as 4x/2x/1x Fiber Channel and 1000BASE-LX Ethernet. It is designed for single mode fiber and operates at a nominal wavelength of 1310nm.

INSP-4G-FC-LW (SFP Duplex LC 4G 1310nm 10km)
The INSP-4G-FC-LW is small form factor pluggable module for duplex optical data communications such as 4x/2x/1x Fiber Channel and 1000BASE-LX Ethernet. It is designed for single mode fiber and operates at a nominal wavelength of 1310nm.

INSP-4G-FC-LX (SFP Duplex LC 4G 1310nm 20km)
The INSP-4G-FC-LX transceiver is small form factor pluggable module for duplex optical data communications such as 4x/2x/1x Fiber Channel and 1000BASE-LX Ethernet.

INSP-4G-FC-LH (SFP Duplex LC 4G 1550nm 40km)
The INSP-4G-FC-LH transceivers is small form factor pluggable module for duplex optical data communications such as 4x/2x/1x Fiber Channel and 1000BASE Ethernet.It is designed for single mode fiber and operates at a nominal wavelength of 1550nm.

INSP-4G-FC-ZW (SFP Duplex LC 4G 1550nm 80km)
The INSP-4G-FC-ZW is small form factor pluggable module for duplex optical data communications such as 4x/2x/1x Fiber Channel and 1000BASE Ethernet. It is designed for single mode fiber and operates at a nominal wavelength of 1550nm.

They are all compliant with SFF-8472 Multi-source Agreement (MSA). If you want to know more about Ingellen’s Fiber Channel SFP modules, please send mail to sales@ingellen.com. Also Ingellen supplies many other types of SFP transceiver modules, from OC-3 SFP(155Mbp/s),OC-12 SFP(622Mbp/s) to 4G SFP transceiver. They are 100% compliant with Cisco, 3Com, Juniper, Foundry, Extreme, Netgear, BrocadeDell, Enterasys, Finisar and others MSA SFP Specification and SFF-8472/SFF-8472.

Posted by: mikofy at 06:47 AM | No Comments | Add Comment
Post contains 553 words, total size 4 kb.

Ingellen SFP transceivers are designed to support SONET/SDH, Gigabit Ethernet, Fiber Channel, Optical Supervisory Channel OSC SFP and other communications standards. You may be want a2.5G SFPmodule for your netwok, follow me to learn more about original 2.5G SFP module supplied by Ingellen.

Ingellen 2.5G SFP transceiver module provides a low cost high-performance connection, which is also known as OC-48 or STM-16. The Ingellen Multi-rate Series 2.67Gb/s transceiver module integrates optics and electronics in a Small Form Factor Pluggable (SFP) package. The 2.5G SFP transceiver provides a complete 2.5G SONETinterfaces compatible with SONET/SDH optical layer and layer. Its microprocessor - based on a modular design to achieve all of the functions specified in the SFP MSA compatible 2-wire serial digital diagnostic monitoring interface optical transceiver.

The Features of 2.5G SFP module:
Compliant with SFF8472 diagnostic monitoring interface;
Industry standard small form pluggable (SFP) package;
Multi-Rate;
Duplex LC connector;
Differential LVPECL inputs and outputs;
Single power supply 3.3V;
TTL signal detect indicator;
Hot Pluggable;
Class 1 laser product complies with EN 60825-1.

The 2.5G SFP transceiver is a network line with transmission speeds of up to 2488.32 Mbit/s (payload: 2405.376 Mbit/s (2.405376 Gbit/s); overhead: 82.944 Mbit/s). With relatively inexpensive interface prices, and being faster than OC-3, OC-12 SFP connections, and even surpassing gigabit Ethernet, OC-48 connections are used as the backbones of many regional ISPs. The 2.5G SFP capabilities on the Cisco ONS 15600 Series consist of two optical line cards, providing interface specifications that meet the varied application needs of the service provider. Interconnections between large ISPs for purposes of peering or transit are quite common.

As of 2005, the only connections in widespread use that surpass 2.5G speeds are OC-192 and 10 Gigabit Ethernet. 2.5G is also used as transmission speed for tributaries from OC-192 nodes in order to optimize card slot utilization where lower speed deployments are used. Dropping at OC-12, OC-3 or STS-1 speeds are more commonly found on OC-48 terminals, where use of these cards on an OC-192 would not allow for full use of the available bandwidth.

The 2.5G SFP module are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The standard serial ID information compatible with SFP MSA describes the transceiver’s capabilities, standard interfaces, manufacturer and other information. The host equipment can access this information via the 2-wire serial bus.

Ingellen Technology is a leadingfiber optic manufacturer, provides custom a fully line of fiber optic transceivers. Ingellen 2.5G SFP modules include SFP Duplex LC 2.5G 850nm 300m, SFP Duplex LC 2.5G 1310nm 2km, SFP Duplex LC 2.5G 1310nm 15km etc. All modules satisfy class I laser safety requirements. More, Ingellen has different SFP transceivers with Cisco compatible for fast Ethernet and Gigabit Ethernet, SFP,Cisco,GLC SX MM,GLC T,GLC ZX SM,GLC BX U,GLC BX D,CWDM DWDM and so on. These Cisco SFP equivalent products are manufactured and tested strictly according to industrial standards, they are compatible to use with equipment from other companies including Cisco. Ingellen supplies the SFP fiber optic transceiver modules with good price, excellent compatibility and fast delivery.

Posted by: mikofy at 06:47 AM | No Comments | Add Comment
Post contains 512 words, total size 4 kb.

Now Ingellen offers more than 40 differentfiber optic products, including all kinds of fiber optic transceivers, it provides a wider choice for the majority of demand platform. SFP (small form-factor pluggable) transceiver is a popular industry format supported by several fiber optic component vendors, used widely in optical communication telecommunications and data communications applications. Ingellen SFP transceiver designed to support Fibre Channel, Gigabit Ethernet, SONET/SDH, optical monitoring channel OSC SFP, and other communications standards.

SFP transceivers are available with a variety of different transmitter and receiver types, allowing users to select the appropriate transceiver for each link to provide the required optical reach. There are several kinds of SFP transceivers, like OC-3/STM-1/155M SFP, OC-12/STM-4/622M SFP, OC-48/STM-16/2.5G SFP, 1.25G SFP and 4G SFP. And today I would like to talk about the OC-3 STM-1 SFP transceiver.

OC-3 SFP module is a network line with transmission speeds of up to 155.52 Mbit/s(payload: 148.608 Mbit/s; overhead: 6.912 Mbit/s, including path overhead), which supports Fast Ethernet. Because of the system it depend on, OC-3 is also called STS-3, STM-1 (SDH). OC3 SFP module is specifically designed for the high performance integrated duplex data link over single mode optical fiber. These transceiver modules are compliant with the SFP Multisource Agreement (MSA). With the hot pluggability, these modules offer an easy way to be installed into SFP MSA compliant ports at any time without the interruption of the host equipments operating online.

There are other major brands like Cisco, Juniper, Hp, Dell, Alcatel and so on provide OC-3 SFP transceiver, for example, Cisco OC-3 SFP transceiver. In the below is some major custom Cisco OC3 SFP transceivers.
SFP-OC3-MM：
OC-3/STM-1 pluggable short-reach (2 km) transceiver module, 1310-nm wavelength, MMF, LC connector
SFP-OC3-SR：
OC-3/STM-1 pluggable short-reach (2 km) transceiver module, 1310-nm wavelength, LC connector
SFP-OC3-IR1：
OC-3/STM-1 pluggable intermediate-reach (15 km) transceiver module, 1310-nm wavelength, LC connector
SFP-OC3-LR1：
OC-3/STM-1 pluggable long-reach (40 km) transceiver module, 1310-nm wavelength, LC connector
SFP-OC3-LR2:
OC-3/STM-1 pluggable long-reach (80 km) transceiver module, 1550-nm wavelength, LC connector

Ingellen SFP transceivers are available with a variety of different transmitter and receiver types,allowing buyers to select the appropriate transceiver for each link to provide the required optical reach. Their originalOC-3 STM-1 SFPtransceivers are manufactured to be complete compatible with Cisco, Juniper, Hp, Dell, Alcatel ect. More, Ingellen can customize your required compatible OC3 SFP transceivers like Cisco OC3 SFP transceivers to fit for you special applications. These transceiver modules are compliant with the SFP Multisource Agreement (MSA). Ingellen also offers other fiber optic transceivers, including all kinds of SFP Transceivers, GBIC Transceivers, CWDM SFP Transceivers, DWDM SFP Transceivers, SGMII SFP Transceiver, SFP+ Transceiver, XFP Transceiver, X2 Transceivers, Xenpak Transceiver and more. Enjoy your shopping there, you can contact the sales@ingellen.com to help you find the right transceiver.

Posted by: mikofy at 06:31 AM | No Comments | Add Comment
Post contains 467 words, total size 4 kb.

TheXFP transceiver(10 Gigabit Small Form Factor Pluggable), defined by an industry group in 2002, is a standard transceiver for high-speed computer network and telecommunication links. The XFP transceiver module connects the electrical circuitry of the system with the optical network, widely used in 10 Gigabit per second SONET/SDH, Fibre Channel, gigabit Ethernet, 10 gigabit Ethernet and other applications, including DWDM links. It can operate over a single wavelength or use dense wavelength-division multiplexing techniques. XFP modules use an LC fiber connector type to achieve high density. XFP transceivers modules comply with the XFP multi source agreement developed by several leading companies in this industry.

XFP Transceiver Features
850nm;1310nm;1550nm Laser diode transmitter;
XFP MSA compliant;
Applications from 100m to 80km;
Protocol Agnostic: supports OC192/STM-64, 10 G Fibre Channel, G.709, and 10 G ethernet;
OC192/STM-64 Eye mask compliant ( 6dB extinction ratio over temperature);
Low power consumption;
Monitor Device Temperature and Voltage;
Stable output power over temperature (low tracking error);
Advanced Digital Diagnostics;
0°C to 70°C temperature range;
SIO Management Interface;
Die cast metal housing for low EMI;
RoHS compliant and Lead Free.

Compared with SFP
The physical dimensions of the XFP transceiver are slightly larger than the original small form-factor pluggable (SFP) transceiver. One of the reasons for the increase in size is to allow for on-board heat sinks for greater cooling.

Dimensions

Typical Types
XFP transceivers commercially available in the market now include the the SR, LR, ER and ZR.XFP SR working distance is 300 meters max, it works with OM3 10GB multimode optical fiber. The other 3 types work with single mode fiber, XFP LR max distance is 10km, XFP ER is 40km, and XFP ZR max working span is 80km via SMF.

These transceivers are with Digital Diagnostics that provide a powerful optical management tool. Ingellen Technology supplies the XFP transceivers which features stable quality and good price. These XFP transceivers are manufactured according to international industrial standards and are strictly tested for compatibility with equipment and devices from major companies in industry.

Comptibale Brands
XFP is regarded to be the new generation 10G solution after the Xenpak and X2 transceivers, many companies have developed the XFP 10G transceivers nowadays, for example, Cisco XFP transceiver.

Cisco XFP transceivers are used for 10Gigabit Ethernet and related 10G applications. Cisco XFP transceivers are compliant to XFP MSA, which is a multi source agreement by various manufacturers in this industry. XFP transceivers from Cisco include common type and DWDM XFP.Cisco XFP transceivers equivalent products from Ingellen, which is an outstandingfiber optic manufacturer,gives the service provider optional good choices for equal performance but much more competitive prices XFP transceivers.

Posted by: mikofy at 06:42 AM | No Comments | Add Comment
Post contains 472 words, total size 4 kb.

As the improvent of network, it will be important to maintain both configuration flexibility and high port utilization for equipment deployed at the intersection of legacy copper and newly installed optical networks. Copper small form factor pluggable (SFP) module ensures the SFP form factor have emerged as the best way to optimize port-level flexibility. The maturation ofcopper SFP moduleis playing a key roll in enabling system designers to meet these objectives while simplifying their inventory and reducing operating costs.

Copper SFP module uses a copper line for linking. The copper transceiver includes transmit and receive two decision points, Radiating portion consists of laser circuit and optical maser, Receiving part consists of PIN, TIA and Limtiting Amp, completion of the digital signal transparent O / E, the E / O conversion functions. Typical copper SFP products like Cisco GLC T and SFP GE T, these SFP modules are used in Gigabit networks and they are fully compatible with 1000Base-T. SFP GE T is the copper SFP that are with extended working temperature and DOM support. And I will talk about the common widely used 1000BASE-T copper SFP module below.

1000BASE-T 1000Base T SFP module means the small form fiber optic transceiver that complies with 1000Base-T standards. 1000Base T SFP is copper SFP transceivers and it uses category 5 cables for linking and with a very limited working span. 1000Base T SFP is designed for Gigabit Ethernet and it works under IEEE 802.3 standards.

Specifications of 1000BASE-T copper SFP module:
1.25 gigabyte Ethernet over cat 5-cable;
Extended case temperature range (0°C to +70°C);
Switch, router to switch, router link;
High speed I/O for file severs;
compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802, 3-2002 and IEEE 802.3ab;
support 1,000 Mbps full duplex data-links with 5-level pulse amplitude modula-tion (PAM) signals;
provide standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2-wire serial CMOS EEPROM protocol;
The physical IC can also be accessed via 2-wire serial bus at address Ach;
Qualified to meet the intent of Bellcore reliability practices;
Compliant with SFP MSA specification and SFF-8472 ;
Links of narrow, intermediate or long reach with single or Multi-mode fiber;
ROHS, CE and FCC certified;
DMI feature on request.

Ingellen Technology, a professionalfiber optic productssupplier, provides the copper SFP module which are made according to IEEE standards, these copper SFP transceivers are suitable to use with the equipment and devices that are with copper SFP slots or ports. The copper SFP module offers a flexible and easy way to be installed into SFP MSA compliant ports at any time without the interruption of the host equipments operation. It allows for seamless integration of fiber with copper LAN connections wherever SFP interface slots are available. Such device is economical, it saves time, offers flexibility and eliminates the necessity for replacing entire devices when the customers need to change or upgrade fiber connections and you will benefit a lot from it.

Posted by: mikofy at 06:39 AM | No Comments | Add Comment
Post contains 508 words, total size 4 kb.